22) Remove the screw and the connector, and remove the PPD1 sen-
sor PWB.
1)
2)
23) Remove two E-rings and remove the paper feed roller.
24) Remove three E-rings and remove the clutch unit.
5)
Clutch unit
Paper feed
roller
4)
3)
2)
C. Assembly procedure
For assembly, reverse the disassembly procedure.
6. Manual paper feed section
A. List
No.
B. Disassembly procedure
Single unit
1) Remove the screw and remove the single upper cover.
Back
4)
Front
1)
2) Remove the screw and remove the side door detection unit.
AR-5012 DISASSEMBLY AND ASSEMBLY 8 - 14
Part name Ref.
1
Manual transport roller
2
Cassette detection switch
3
PPD1 sensor PWB
4
Side door detection unit
1)
2)
1)
Back
Wire treatment
2)