Transcension DC-4P Operation Manual

INTRODUCTION:

This model is a 4 channel dimming chaser, has 7 operating modes and 42 chasing programs, memory
backup and fade time under control.

TECHNICAL SPECIFICATIONS:

POWER INPUT ................................................................................... AC 230V~50-60Hz (CE)
AUDIO INPUT ....................................................................................................... 100mV-1Vpp
CHANNEL OUTPUT ............................................................................... 2A/CH., Total 8A (CE)
CHANNEL FUSE ..................................................................................... F6.3A 250V 5x20mm
FUSE (internal) ....................................................................................... F0.5A 250V 5x20mm
DIMENSIONS ............................................................................................. 482.6x133x138mm
WEIGHT ........................................................................................................................... 4.4Kg
CONTROLS & FUNCTIONS
7
POWER
1
8
9
1. POWER SWITCH
2. SPEED INDICATOR
This indicator indicates the chasing speed.
3. AUDIO LEVEL INDICATOR
This indicator indicates the sensitivity of music rhythms.
4. MASTER DIMMER INDICATOR
This indicator indicates master dimming level.
5. PROGRAM DISPLAY
Shows desired pre-set digit parameter.
6. PROGRAM INDICATOR
This indicator indicate the operating mode being executed.
7. CHANNEL DIMMER INDICATOR
This indicator indicates the dimming level of corresponding channel.
8. CHANNEL DIMMER CONTROL
This control adjusts the dimming level of corresponding channel.
9. CHANNEL FLASH BUTTON
Press to activate channel full on function.
10. MODE SELECT BUTTON
Press to select desired operating mode from Hold Dimmer / Hold Sound / Prog Sound / Prog Speed/
Auto Speed / Auto Sound / Memory or music control from line input / built-in microphone.
11. PROGRAM SELECT BUTTON
Press to select desired program from 42 pre-set programs in Prog Sound / Prog Speed / Auto
Speed / Auto Sound. In Memory mode, you can press to activate sub-mode to select desired
operating mode from Program / Manual / Auto Sound / Auto Speed using STAND BY .
12. FADE CONTROL
This control adjusts the delay time. It is not effective in Hold Sound.
13. STAND-BY BUTTON & INDICATOR
Press to pause all output.
CH-1 CH-2 CH-3 CH-4
10 10 10 10
8 8 8 8
6 6 6 6
4 4 4 4
2 2 2 2
0 0 0
0
Flash Flash Flash Flash Mode Select
DC-4P
4 Channel Dimming Pack
OPERATION MANUAL
AC 220V~50-60Hz (MAX.)
6.3A/CH., Total 16A (MAX.)
6 5 4
MODE FADE TIME DIMMER AUDIO
Hold Dimmer
10S 10 10
8 8 8
Hold Sound
I
:Internal MIC
E 6 6 6
:Audio line input
Prog Sound
4 4 4
Prog Speed
2 2 2
Stop 0 0
Auto Auto
Sound Speed
Program
Memory
Prog Select Stand-by
10 11 12 13 14 15 16 17 18
3 2
SPEED
10
8 DC-4P
6
MIC
4 Channel
4
Dimming
2
Pack
0
Full on Tap sync
24-004-0907-00
Rev 1.2
www. prolight.co.uk
sales@prolight.co.uk