Related Manuals for Streamax MDVRs
Summary of Contents for Streamax MDVRs
-
Page 1: Installation Manual
ISTALLATON M-ALL MDVR-2012_Q2_Ver 1.0 Installation Manual All Streamax MDVRs Mobile Digital Video Recorder Copyright 2012-2014, Streamax Video Technology Co., Ltd All Rights Reserved 1/27... -
Page 2: Table Of Contents
ISTALLATON M-ALL MDVR-2012_Q2_Ver 1.0 Table of Content NOTICE ........................................2 Installation General Instruction ................................4 Part 1 MDVR Device Installation ..............................5 Pre-Installation Preparation ................................. 5 Technical Requirement ..............................5 Installer and Supervisor Qualification ..........................5 Pre-installation Investigation and Installation Plan Making ..................5 Reference Installation Tool .............................. -
Page 3: Notice
ISTALLATON M-ALL MDVR-2012_Q2_Ver 1.0 NOTICE Before you install the MDVR system in the vehicle, please be familiar with this system and read this manual carefully. Meanwhile the whole installation process must be guided by the professional persons. MDVR is electronic recording and storage system which must be delivered very carefully. Use only a regular 12-volt DC or 24-volt DC (3 ~ 5 Amps) certified power supply for installation in vehicles. -
Page 4: Installation General Instruction
ISTM-ALL MDVR-2012_Q2_Ver 1.0 Installation General Instruction Before install the recorder system and accessories, the most important is to know the vehicle construction especially for power. Please check following: Which MDVR model and accessories will be installed? In which part of the vehicle can install the MDVR? How big the size is? Cables and installation tools (for example: electric drill, screw driver, screws, multimeters etc…) Manpower distribution General concept for wiring... -
Page 5: Part 1 Mdvr Device Installation
ISTM-ALL MDVR-2012_Q2_Ver 1.0 Part 1 MDVR Device Installation Pre-Installation Preparation Technical Requirement Be familiar with the MDVR device functions and application Be familiar with the whole MDVR solution Be familiar with the vehicle electrical circuit, vehicle structure and installation skills. Installer and Supervisor Qualification Supervisor Qualification and responsibility 1. -
Page 6: Reference Installation Tool
ISTM-ALL MDVR-2012_Q2_Ver 1.0 Reference Installation Tool Item Name Photo Specification Function Remark Drill the holes Electric Drill To drill the hole in the vehicle to get the Drill bit 12mm power cable out getting the power for the MDVR. To drill the hole for Drill bit 2.8mm cameras, monitor... -
Page 7: Mdvr Device Installation
ISTM-ALL MDVR-2012_Q2_Ver 1.0 soldering iron for welding Tin Bar Diagonal for cable connecting Pliers Crimping for cable connecting Pliers Scissors shrinkable tube cut shrinkable tube Heat Gun encapsulation Glass glue for hole sealing and fixation. MDVR Device Installation The basic Installation principal is: 1. -
Page 8: The Hard Disk Installation
ISTM-ALL MDVR-2012_Q2_Ver 1.0 necessary the external protection device is recommended (lock box or installation bracket) d) Dustproof: The device must be installed on the point with little dust e) Installation points size: horizontal installing for MDVR device is recommend as it is easier for installation and maintenance. -
Page 9: Mdvr Device Installation
ISTM-ALL MDVR-2012_Q2_Ver 1.0 The power extension should be a little bit longer to leave some space for movement during the vehicle is running. The external protection tube (fire resistant PVC bellow) are recommended. The diameter for the cable is required to be from 1.5mm to 2.5mm. Even for the bigger power consumption MDVR device or 12V vehicle with the long distance wiring requires that the cable diameter should be 2.0mm copper material inside. - Page 10 ISTM-ALL MDVR-2012_Q2_Ver 1.0 Some tips for installation: （1） 12V natural gas anti-interference isolation When install the MDVR in 12V natural gas vehicles, the MDVR device must be insulated with the body of the vehicle. Get power for the MDVR from vehicle battery directly and make sure to install the power protector and security device between the MDVR device and battery.
-
Page 11: How To Choose And Install Cameras
ISTM-ALL MDVR-2012_Q2_Ver 1.0 stretched. Protection solution are need for cable cut parts. To fix the MDVR device well How to Choose and Install Cameras 1) Camera Selection There are 5 features should be considered for vehicle camera. （1） The monitored space for camera (Angle) （2）... - Page 12 ISTM-ALL MDVR-2012_Q2_Ver 1.0 MDVR Deriver’s seat Rear Door Front Door MDVR Driver’s seat Rear Door Front Door 4) The Installation Photos for Reference Mainly the installation point for camera is really depends on different vehicle and different application. Here please see some photos for reference.
- Page 13 ISTM-ALL MDVR-2012_Q2_Ver 1.0 rear camera For police car, taxi or some other vehicles, the camera installation point will be different. Here are some photos for reference. Install 2 cameras on the roof of the police car For taxi installation The PTZ for police car application 13/27...
-
Page 14: Antenna (Gps/Wifi/3G) Connection
ISTM-ALL MDVR-2012_Q2_Ver 1.0 Antenna (GPS/WIFI/3G) Connection For the products with WIFI, GPS, 3G functions, the antenna will be shipped with the MDVR together to customers. 3G Antenna WIFI Antenna Built-in GPS Antenna External GPS Here are some tips for antenna connection and fixation: （1）... -
Page 15: Monitor Installation
ISTM-ALL MDVR-2012_Q2_Ver 1.0 5) General Connection Instruction （1） Choose right place for antenna for GPS/WIFI/3G installation. Generally the antenna are recommended to be installed in front part of vehicle roof (please drill one hole on the vehicle roof and installed the antenna outdoor) and fix them. -
Page 16: How To Connect The I/O Sensors
ISTM-ALL MDVR-2012_Q2_Ver 1.0 and can avoid sight reflection such as around rear-view mirror. How to connect the I/O Sensors The MDVR device can support 8 sensor inputs and 2 or 4 outputs (depends on different models. Some of the models can support 2 outputs only).The inputs are used to detect the driving behavior like panic button for emergency alarm, braking, turning left or right, open or close the door, reverse etc…... -
Page 17: How To Connect Alarm System
ISTM-ALL MDVR-2012_Q2_Ver 1.0 2) How to connect the signal for braking When the driver stamps the brake vane, the MDVR device can detect the high power level. Otherwise it is low power level. Braking light 12V/24V Brake Vane To connect the sensor signal of the vehicle by alarm box Alarm outputs are power level output. - Page 18 ISTM-ALL MDVR-2012_Q2_Ver 1.0 Fuse Any sensor inputs (Supposed sensor Any sensor inputs (Supposed sensor 4) For high level power input Fuse The connectors on the back of the button 2) The Photos for Reference Alarm System for Passengers Signal wire of this alarm button is 4*0.2 wires. The wiring diagram as picture below: Pin 2: Power Positive polarity………Red Pin 4: Power negative polarity……..Black Pin1: Alarm input…………………..Green...
-
Page 19: How To Deal With The Connection For Cables And Wire
ISTM-ALL MDVR-2012_Q2_Ver 1.0 the air-conditioner. Different vehicle has different internal environment. Every vehicle should have the suitable installation method. Here introduce the installation steps for the vehicle with air-conditioner: （1） Drill the hole close the channel for air conditioner （2） Pull the wire through air conditioner channel and take it out from the hotel and connect with alarm （3）... -
Page 20: Mdvr Device Testing
ISTM-ALL MDVR-2012_Q2_Ver 1.0 Wiring Inspection Cable wiring should be cross-vertical strokes, orderly to keep the vehicle clean and safe （1） Wiring for power cable, extension cable, ground wire and digital wire should be in orderly. （2） Keep 90 degree angle if cables cross is necessary. （3）... -
Page 21: Accessories Testing
ISTM-ALL MDVR-2012_Q2_Ver 1.0 Accessories Testing Camera testing After the MDVR gets power and works fine. Please try to test the camera as following: Checking the video interference exists or not firstly. （1） Angle and focus adjustment and turning the Lens circle to adjust the focal length for a （2）... -
Page 22: Vehicle Speed And Pulse Testing
ISTM-ALL MDVR-2012_Q2_Ver 1.0 option. Define the name according to sensor connected. EN: Enable, to active this function NAME: Press ENTER on the Name field to display the soft keyboard. Enter the text name to identify the source of each Sensor connected to the unit. OSD: Input the numbers and Characters, they will be embedded into the alarm video files when alarms happen, and it will also display in live view, Please press【Enter】... -
Page 23: Wireless Network Testing
ISTM-ALL MDVR-2012_Q2_Ver 1.0 Please input 40MP/H for SPD, when vehicle speed last 40MP/H for half minute. Please press the “CHECK”, A value will appear automatically from P/S. For example:20, the rate confirmed between Pulse value and driving speed of sensor. Direct inputting SPD for the same model vehicle, no more adjustment. -
Page 24: 1.4.5 Software Upgrade
GPS location debugging: Enter into the OSD interface to check the longitude and latitude. 2) Internet function Testing ( local IP.WIFI,3G) For the details please check the Streamax CMS and 3G connection manual. 1.4.5 Software Upgrade Create a folder named ‘dvrupgrade’ in the thumb drive and then copy the firmware upgrade file to this folder. -
Page 25: Setup Machine Registration Information
ISTM-ALL MDVR-2012_Q2_Ver 1.0 Please do not disconnect the power supply for MDVR or remove the thumb drive during firmware upgrade. To ensure the firmware upgrade is completely successful, please check if the firmware has the latest version after MDVR is being restarted. 1.4.6 Setup Machine Registration Information Please check the details in the MDVR GUI manual... -
Page 26: Appendix
ISTM-ALL MDVR-2012_Q2_Ver 1.0 Appendix Bus Application 26/27... -
Page 27: The Table For Bandwidth And Frame Rate
ISTM-ALL MDVR-2012_Q2_Ver 1.0 The Table for Bandwidth and Frame Rate. BitRate GOP Size Frame Rate (Frms/S) (Kbps) Default: P(N) Range: P(N) Default Range 50(60) 25-100(30-120) 50(60) 25-100(30-120) 50(60) 25-100(30-120) 50(60) 25-100(30-120) 50(60) 25-100(30-120) 5-11 50(60) 25-100(30-120) 5-12 50(60) 25-100(30-120) 5-12 50(60) 25-100(30-120) 6-13...
Need help?
Do you have a question about the MDVRs and is the answer not in the manual?
Questions and answers