NOTE: The graphics in
this section may differ
slightly from the graphics
on your computer.
NOTE: The default
password is switch.
34
Web I n t e r f a c e
With web-based management, you can configure the PowerConnect 3048
Fast Ethernet Managed Switch and monitor the system using a web
browser.
Most web pages for the switch feature the following buttons:
•
Reload — Displays the current values for the system related to the web
page that is open.
Apply — Makes changes to the system and refreshes the page. These
•
changes do not persist past the current session.
NOTICE: For changes to persist beyond the current session, you must save the
new configuration from the Save Configuration page.
•
Add — Adds new entries to the system and refreshes the page.
•
Remove — Removes selected entries from the system and refreshes
the page.
Web Pages
When you connect to the switch with a Web browser, a login screen is
displayed (if password protection has been enabled). The user name is
always
. Enter the password to access the switch's management mode.
root
Once the password is entered correctly, the front page will appear.
The following menus are available from the Web interface:
•
Home