Understanding The Printer Messages; Cartridge, Imaging Unit Mismatch [41.Xy]; Cartridge Low [88.Xy]; Cartridge Nearly Low [88.Xy] - Lexmark MS510 Service Manual

Understanding the printer messages

Cartridge, imaging unit mismatch [41.xy]

1
Check if the toner cartridge and imaging unit are both MICR (Magnetic Imaging Content Recording) or non-MICR
supplies.
Note: For a list of supported supplies, see the "Ordering supplies" section of the User's Guide or visit
www.lexmark.com.
2
Change the toner cartridge or imaging unit so that both are MICR or non‑MICR supplies.
Notes:
•
Use MICR toner cartridge and imaging unit for printing checks and other similar documents.
• Use non-MICR toner cartridge and imaging unit for regular print jobs.

Cartridge low [88.xy]

You may need to order a toner cartridge. If necessary, select Continue on the printer control panel to clear the message
and continue printing. For non‑touch‑screen printer models, press

Cartridge nearly low [88.xy]

If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press

Cartridge very low, [x] estimated pages remain [88.xy]

You may need to replace the toner cartridge very soon. For more information, see the "Replacing supplies" section of
the User's Guide.
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press

Change [paper source] to [custom type name] load [orientation]

Try one or more of the following
• Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper
menu on the printer control panel, and then select Finished changing paper. For non‑touch‑screen printer models,
press to confirm.
• Cancel the print job.
to confirm.
to confirm.
Diagnostic information
70
4514-630, -635, -636, -638, -639, -649
to confirm.