Hello Kitty SPORTS CAR Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

OWNER'S MANUAL

HELLO KITTY SPORTS CAR

THIS MANUAL CONTAINS

IMPORTANT

SAFETY

PERFORMANCE

AND

MAINTENANCE

INFORMATION

READ THE MANUAL BEFORE ALLOWING

YOUR CHILD TO RIDE YOUR NEW ELECTRIC RIDE

ON TOY

KEEP THE MANUAL HANDY FOR FUTURE

REFERENCE

DO NOT RETURN TO STORE!

QUESTIONS OR COMMENTS?

STOP

1-800-288-1560

FOR AGES 3-8 YEARS

MAXIMUM WEIGHT: 65 lbs. (29.5 kgs)

NOTE: Illustrations in this Manual are for reference purposes only and may not reﬂect the exact

appearance of the actual product. Speciﬁcations are subject to change without notice.

Table of Contents

Need help?

Do you have a question about the SPORTS CAR and is the answer not in the manual?

Questions and answers

Summary of Contents for Hello Kitty SPORTS CAR

Page 1 OWNER’S MANUAL HELLO KITTY SPORTS CAR THIS MANUAL CONTAINS IMPORTANT SAFETY PERFORMANCE MAINTENANCE INFORMATION READ THE MANUAL BEFORE ALLOWING YOUR CHILD TO RIDE YOUR NEW ELECTRIC RIDE ON TOY KEEP THE MANUAL HANDY FOR FUTURE REFERENCE DO NOT RETURN TO STORE!
Page 2 TABLE OF CONTENTS A Introduction, Safety and Warnings B Before You Begin Assembly C Parts Diagram D Assembly E How to Use Your Vehicle F Detailed Maintenance and Repair G Troubleshooting Guide H Warranty ELECTRIC CAR SPECIFICATIONS SUITABLE AGE 3-8 Years CAPACITY up to 65lbs (29.5kgs) SPEED...
Page 3 INTRODUCTION, SAFETY, AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride- on toy. It is important for you to understand your new electric ride-on toy. By reading this manual before you let your child go out on his/her ﬁrst ride, you will know how to get the most from your new electric ride-on toy.
Page 4 Always wear appropriate clothing and shoes, including long sleeved shirts and long pants and lace-up or similar shoes with rubber soles. Never ride barefoot or in sandals and make sure that shoelaces or other fasteners are tied and kept away from the wheels and drive system of the ride-on toy.
Page 5 SAFE RIDING PRACTICES AND WARNINGS • Check and obey all local laws or regulations which may be in effect in the locations where the electric ride-on toy may be used. • Always wear a helmet and other safety equipment and appropriate clothing and shoes.
Page 6: Using The Charger
• Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts. • Before each cycle of operation, you must perform the preoperation checks speciﬁed in this manual or by the manufacturer, including: •...
Page 7 BEFORE YOU BEGIN ASSEMBLY WARNING Remove all packing and items from the display box. Make sure that the power switch is turned “OFF” before assembling the electric ride-on toy. ESTIMATED ASSEMBLY TIME You should allow approximately 35 minutes for assembly, not including initial charging time.
Page 8 Plastic Body Assembly Motorhood Steering Column Rear Wheel Axle 12 Washer i v i M10 Lock Nuts Front Wheel Steering Wheel Gear Box M5x35 Machine Screw Charger 12 bushing Windshield Axle Cap Seat 4x12 Round Head Screws M5x16 Machine Screws Split Pin 10 Washer Note: Some parts shown are assembled on both sides of vehicle.
Page 9: Tools Required
ASSEMBLY t l u . y l for assembly. Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. Tools Required: Standard slip joint pliers 17mm Socket Wrench Phillips Screwdriver (included) (not included)
Page 10 2. Rear Axle Assembly . Turn the vehicle body upside down. . Remove all parts from rear axle. . Slide a Ø 12 washer onto the rear axle from the longer end. . Insert the rear axle through the hole in the vehicle body.
Page 11 4. Steering Column Assembly . Turn the vehicle body on its side as shown in picture below. . Slide a 10 washer onto the steering column from the straight end. Ø . Insert the straight end of steering column up through the bottom hole at the front of vehicle body, and out through the hole in the dash.
Page 12 8. Motorhood Assembly . Take out the motorhood from polybag. . Install the motorhood in the proper position as shown, and secure it with four 4x12 ﬂat head screws. 9. Seat Assembly . Insert the tabs on the back of the seat into the slots in the vehicle body.
Page 13 Remove the batteries from the battery compartment when the unit will not be used for an extended period of time. Always remove exhausted batteries from the battery compartment. Do not dispose of batteries in fire. Do not short circuit the supply terminals. Replace the batteries when the horn sounds distorted.
Page 14: Battery Charging
BATTERY CHARGING IMPORTANT! Before ﬁrst time use, charge the battery for at least 18 hours. Charge the battery for at least 12 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Over charging or undercharging the battery may shorten battery life and decrease vehicle running time.
Page 15 · Do not charge the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery. · Use only an original charger (120VAC 60Hz) with an output of 6 VDC (1A) to charge your vehicle battery.
Page 16 HOW TO USE YOUR VEHICLE FORWARD 1. Move the “Forward-Backward switch” into the “Forward” position. 2. Press the “Foot pedal”, and the vehicle will move forward. STOP The vehicle will stop automatically, when your child’s foot is removed from the “Foot pedal”.
Page 17 3. Adjust your audio device or MP3 player volume to low level and turn the power switch on your vehicle to the “ON” position. 4. Then adjust the volume to increase or decrease its sound level as desired. Note: MP3 player or Audio device not included. IMPORTANT Always stop vehicle when changing the direction to avoid damage to the gears and motor.
Page 18: Safety Precautions
SAFETY PRECAUTIONS • Your new battery must be charged for at least 18 hours before you use it in your vehicle for the ﬁrst time. • The child must have adult supervision at all times. • Do not ride on the road, footpaths, near pools, or bodies of water. •...
Page 19 DETAILED MAINTENANCE AND REPAIR Turn power “OFF” before conducting any maintenance procedures. Tools Required: Flat head Screwdriver 17mm Socket Wrench (not included) (included) HOW TO REPLACE FRONT WHEELS & REAR LEFT WHEEL Remove the Axle Cap with a ﬂat head screwdriver. Remove the M10 locknut with a 17mm socket wrench.
Page 20 HOW TO REPLACE DRIVING WHEEL AND GEAR BOX Remove the Axle Cap with a ﬂat head screwdriver. Remove the M10 locknut with a 17mm socket wrench. Remove the Ø12 washer. Remove the driving wheel, and replace with new wheel. If you do not need to replace the gear box, please proceed to step 9. Unscrew the screws on the seat with a screwdriver and remove the seat.
Page 21 HOW TO REPLACE THE POWER SWITCH Remove the power switch with a ﬂat head screwdriver (not included). Unplug the main connector from the power switch socket as shown. Plug in the new power switch for replacement. HOW TO REPLACE THE FOOT PEDAL Turn the vehicle body on its side.
Page 22: Battery Care And Disposal
BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE WITH YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: Disposal: This product contains sealed lead acid batteries which must be disposed of...
Page 23: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the vehicle indoors or cover it with a tarp to protect it from wet weather. Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
Page 24: Troubleshooting Guide
TROUBLESHOOTING GUIDE Problem Possible Cause Solution Vehicle does not run Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the ﬁrst time. After ﬁrst-time use, recharge the battery for at least 12 hours after each use.
Page 25 Problem Possible Cause Solution Tripped thermal fuse The built-in thermal fuse may “trip” and shut down operation of the vehicle if the vehicle is overloaded or the driving conditions too r t “ ” d power switch to the "OFF" position, release the foot pedal, and wait approximately 2 minutes before operating the vehicle again.
Page 26: Possible Cause
Problem Possible Cause Solution Vehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the ﬁrst time. After ﬁrst- time use, recharge the battery for at least 12 hours after each use.
Page 27: Limited Warranty
WARRANTY Limited Warranty Subject to the following limitations, all electric ride-on toys manufactured for Dynacraft are warranted to the original purchaser to be free of defects in materials and workmanship for a period of 90 days from the date of purchase. No other express or implied warranty is given.
Page 28 Dynacraft Customer Service 1.800.288-1560 7AM TO 4PM PACIFIC TIME Please have the following information available when you call: Model Number: (sample: 8595-95) Production Date: (sample: 2003.10.10) Serial Number: (sample: 03TD5899988) Having this information is required and helps us handle your call more effectively. DO NOT return this item to the store.