Driving With A Passenger - Polaris Ranger RZR 170 2013 Owner's Manual

Table of Contents

Advertisement

OPERATION

Driving with a Passenger

1. Complete the New
Operator Driving
Procedures outlined on
pages 42-43.
2. Perform the pre-ride
inspection. See page
38.
3. Do not carry a
passenger until you
have at least four hours
of driving experience
with this vehicle.
4. Never operate with a passenger under age 12. Make sure the
passenger is tall enough to comfortably and safely sit in the
passenger seat with the seat belt secured, put both feet on the floor
and grasp the hand holds.
5. Make sure the passenger has at least 2 inches (5 cm) of clearance
between his helmet and the top of the cab frame.
6. Never carry more than one passenger in this vehicle.
7. Never allow a passenger to ride on the back of the vehicle. Allow a
passenger to ride only in the passenger seat.
8. Make sure the passenger is wearing helmet, eye protection, gloves,
long-sleeve shirt, long pants and over-the-ankle boots. See page 10.
9. Make sure the passenger secures the seat belt.
10. Tell your passenger to always keep hands and feet inside the vehicle
at all times.
11. Make sure all cab nets are properly secured.
12. Drive slowly. Vehicle handling may change with a passenger on
board. Always travel at a speed appropriate for your skills, your
passenger's skills, and operating conditions. Avoid unexpected or
aggressive maneuvers that could cause discomfort or injury to a
passenger.
13. Always follow all operating guidelines as outlined on safety labels
and in this manual.
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents