Digital Display - Quietside QS36-VJ220 Owner's Manual Install Manual

Up & down swing icon:
20
is displayed when pressing the up & down swing button. Press this button again to clear the display.
Left & right swing icon:
21
is displayed when pressing the left & right swing button.Press this button again to clear the display.
SET TIME display:
22
After pressing TIMER button, ON or OFF will blink.This area will show the set time.

DIGITAL display:

23
This area will show the set temperature. In SAVE mode,"SE" will be displayed.
FAN SPEED display:
24
Press FAN button to select the desired fan speed setting(AUTOLow-Med-High).Your selection will be displayed in the LCD windows,
except the AUTO fan speed.
Remote controller description
ON/OFF:
1
Press this button to turn on the unit. Press this button again to turn off the unit.
MODE:
2
Each time you press this button,a mode is selected in a sequence that goes from AUTO, COOL,DRY, FAN, and HEAT *, as the
following:
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and the unit will
automatically select the suitable operation mode in accordance with the room temperature to make indoor room comfortable.
+ :
3
Press this button to increase set temperature. Hold it down for above 2 seconds to rapidly increase set temperature. In AUTO mode,
set temperature is not adjustable.
-:
4
Press this button to decrease set temperature. Hold it down for above . 2 seconds to rapidly decrease set temperature. In AUTO
mode, set temperature is not adjustable.
FAN :
5
This button is used for setting fan speed in the sequence that goes from AUTO,
6
●Press button to start or stop up & down swing function.The remote controller defaults to simple swing condition.
●Press + button and
seconds.
●In static swing condition, pressing
●If the unit is turned off during swing operation,the louver will stop at present position.
HEALTH SAVE:
7
HEALTH function:there is no this function for this unit. If press this key, the main unit will click, but it also runs under original status.
Save energy function: this unit has no this function, press this button, the mian unit will click, "SE" will be displayed on the LCD of
wireless remote control, fan speed automatically rotates, when repress this button, the fan speed will run at previous setting fan speed.
8
There is no this function for this unit. If press this key, the main unit will click, but it also runs under original status.
AUTO COOL DRY FAN
*Note: Only for models with heating function.
AUTO
Low speed
button at the same time at unit OFF to switch between simple swing and static swing;
button, the swing angle of up & down louver changes as below:
OFF
HEAT*
Medium speed High speed
, , to then back to Auto.
blinks for 2