Front Panel - Sony HDC-X300 Operation Manual

Front Panel

Tally cable (Tally unit)
aTALLY connector
Rubber lens mount stopper
Lens stopper attachment
a TALLY connector (minijack)
The tally signal is supplied from this connector. Tally can
be controlled via the cable from the tally unit connected
here.
b Lens mount (1/2-type Bayonet)
A lens mount cap is attached here at the factory as shown
in the above figure. Remove the cap and attach an
appropriate lens.
18
Locations and Functions of Parts
TALLY
ND filter select knob (page 14)
bLens mount
Lens mount cap
Lens mount lever