Do you have a question about the 627/629 and is the answer not in the manual?
Questions and answers
Summary of Contents for Lilyking 627/629
Page 1
We wish you many years of safe heating and cooking pleasure with your new LILYKING stoves. If you need any assistance regarding the installation or maintenance of your stove, contact your local dealer or our main sales...
Page 1 Part 1 Caution and Safety Notice This stove must be installed in accordance with these instructions and must comply with local building and fire codes. Failure to do so could result in a chimney or house fire. Keep children, furniture, fixtures, and all combustible materials away from any heating appliance.
The proper flue size is determined by the inside diameter of the flue collar on the unit. The 627/629 model is equipped with a five-inch (5”) flue collar, and the others six-inch (6”). This stove would require a six-inch (6”) pipe and bend, smaller diameter pipe should never be used.
Page 8 Part 4 Floor and Wall Protection Position your stove on an approved non-combustible floor protector. If the base floor is constructed of combustible material such as hardwood, carpet, or linoleum, floor protection MUST be placed between the unit and the combustible material.
Page 9 Part 5 Installation and Placement PRIOR TO INSTALLATION READ THIS INSTRUCTION MANUAL IN ITS ENTIRETY. Light the stove for the first time and bring the heat up slowly. CHOOSING A LOCATION A central location is most desirable, however, the minimum run of pipe to the chimney should be the deciding factor.
TEMPERATURE CONTROL AND FIRE ADJUSTING The heat output of our model 627/629 and 657/659stove is regulated by spin valve and 667/669 and 679 by air shutter and 677 Model has thermostat which adjusts the stove’s temperature by increasing or decreasing the flow of draught.
Page 13
TEMPERATURE CONTROL AND FIRE ADJUSTING The heat output of our model 627/629 and 657/659stove is regulated by spin valve and 667/669 and 679 by air shutter and 677 Model has thermostat which adjusts the stove’s temperature by increasing or decreasing the flow of draught.
This will cause air to pull down the chimney instead of allowing it to go up. Max BTU Output: Model 627/629: 22,000 BTU/HR Model 657/659: 27,000 BTU/HR Model 677/679: 50,000 BTU/HR Model 667/669: 40,000 BTU/HR CAUTION: Some of the above conditions can also cause downdrafts.
Need help?
Do you have a question about the 627/629 and is the answer not in the manual?
Questions and answers