Table of Contents
Advertisement
8
U
SING THE
Tips before operating your
camera
• You cannot activate the camera while on a call.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a "Low memory" error, check your
resolution and quality compression settings.
See "Setting up the camera" on this page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
• Camera settings and options can only be
accessed when the camera is active.
Accessing camera and video
modes
The camera can be used with the slide open
or closed.
Slide closed
• Press
until you hear one beep to activate
camera mode.
• Press
until you hear two beeps to
activate video mode.
User Guide for the Slider Sonic Phone
C
AMERA
Slide open
• Press
until you hear one beep to activate
camera mode.
• Press
until you hear two beeps to
activate video mode.
Camera settings
Press and hold
1.
– Press and hold
to Picture mode if necessary. Look for the
or
icon at the top of the home
screen.
Press the right softkey
2.
Press
to select
3.
Highlight an option and press
4.
–
options are On, Off, or Automatic.
Flash
–
options are 640 x 480, 320 x 240
Resolution
(best for sending to email), and 160 x 120.
–
Low Light Mode
low light environments.
–
options are Off (default) or 3,
Self Timer
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when
Multishot
to activate picture mode.
to switch from Video
to select
Options
.
Settings
:
brightens the picture for
mode is activated.
.
27
Advertisement
Table of Contents
