Samsung HW-J6000 User Manual page 19

● Switching the Soundbar's mode from TV to another mode automatically terminates TV
SoundConnect.
● To connect the Soundbar to another TV, the existing connection must be terminated.
● Terminate the connection to the existing TV, and then press the p button on the remote control
for 5 seconds to connect to another TV.
● The TV SoundConnect (SoundShare) function is supported by some Samsung TVs released from
2012 on. Check whether your TV supports the TV SoundConnect (SoundShare) function before
you begin. (For further information, refer to the TV's user manual.).
● If your Samsung TV was released before 2014, check the SoundShare setting menu.
● If the distance between the TV and Soundbar exceeds 10 meters, the connection may not be stable
or the audio may stutter. If this occurs, relocate the TV or Soundbar so that they are within
operational range, and then re-establish the TV SoundConnect connection.
● TV SoundConnect Operational ranges:
- recommended pairing range: within 2 meters.
- recommended operational range: within 10 meters.
● The Play/Pause, Next, and Prev buttons on the Soundbar or Soundbar's remote do not control the
TV.
+ Using the Bluetooth POWER On function
The Bluetooth POWer On function is available after you have successfully connected the Soundbar to a
Bluetooth compatible TV using TV SoundConnect. When the Bluetooth POWer On function is ON, turning
the connected TV on or off will turn the Soundbar's power on and off as well.
1. Connect the TV to your Soundbar using the TV SoundConnect function.
2. Press the Bluetooth POWER button on the Soundbar remote. On - BLUETOOTH POWER appears on the
Soundbar's display.
• On - BLUETOOTH POWER : The Soundbar turns on and off when you turn the TV on or off.
• OFF - BLUETOOTH POWER : The Soundbar only turns off when you turn the TV off.
● This function is supported by some Samsung TVs released from 2013 on.
19
CONNECTIONS