Table of Contents
Advertisement
Section 6 COPY DEFAULT SETTINGS
Checking the total copy count and printing out a report
It is possible to use the operation panel to check the total number of
copies made. It is also possible to print out that information in the
form of a report.
1
Press down on the Stop/Clear key for at least 3 seconds.
The copy count will begin to be shown on the copy quantity/
magnification display.
2
The copy count will be shown in three portions in the
following order. (In this example, the total number of copies
made is 1,234.)
(1)
(2)
NOTE
If you press the Start key while the total copy count is
being shown, the Total Count Report will be printed out.
If you are going to print out the Total Count Report,
make sure that there is 8
either loaded in a drawer or set on the multi-bypass tray.
6-12
(3)
" × 11" (Letter) or A4 paper
1/2
Sample Total Count Report
3
Once the total copy count has been shown, the copier will
return to a copy-ready state.
- Quick Links:
- Basic Copying Procedure
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the copier and is the answer not in the manual?
Questions and answers
How do we scan a document and file it on the computer? The 'scan file' is set up on the computer already.
To scan a document with a Kyocera copier and save it on your computer, follow these steps:
1. Open the Kyocera Quick Scan Utility.
2. Choose "Scan to PDF" under scan profiles.
3. Click "Browse" and select the folder where you want to save the scanned document.
4. Click the "Start Scan" button to begin scanning.
5. Once the scan is complete, you will receive a confirmation.
6. Click "Close" and find the PDF document in the selected folder.
This answer is automatically generated