Scanner Page; Printer - Document Output; Scanner - Defaults - Kyocera COMMAND CENTER Multifunctional Printer Operation Manual

COMMAND CENTER Pages
Printer > Document Output

Scanner Page

Scanner > Defaults
18
This page lets you select an output tray.
Item
Paper Output
This section includes settings that apply to the scanning function of the machine, such
as default scan resolution or original placement.
In order to attach scanned data file to an E-mail and send it, the SMTP settings on the
Advanced page must be completed.
The table below provides a summary of the items displayed on the Scanner > Default
page.
Item
Scan Color /
Density
Scan
Resolution
Original Image
File Format
Image Quality
PDF/TIFF/JPEG
High-
Compression
PDF Image
High-
Compression
PDF Auto Color
Auto Color
Correction
Zoom
Description
Determines the default output tray.
Description
Switches the scanning resolution and exposure mode from
Full Color/Manual, Gray Scale/Manual, Monochrome/
Manual, and Monochrome/Auto.
Specifies the resolution. The maximum resolution using full
color or gray scale mode is 300 x 300 dpi.
To scan in full color or gray scale with 400 dpi or 600 dpi
resolution, expansion of the internal memory is required.
The original quality is selected according to the type of
original.
Switches the original quality between Text, Text+Photo,
and Photo.
Selects the file format in which the scanned data will be saved.
Selects the file quality mode (1 [Low] to 5 [High]) in which the
scanned data will be saved.
Selects the compression rate for PDF files from 1 (Low), 2
(Medium), and 3 (High).
Sets whether to enable or disable the automatic color/
monochrome detection for the original to be scanned.
Selects the detection level from five levels applied when
High-Compression PDF Automatic Color Detection is set
to ON. The color mode tends to be used at Level 1 and the
monochrome mode at Level 5.
Switches the zoom ratio between Auto and 100%. The
default setting is 100%.
KYOCERA COMMAND CENTER