Setting The Clock - Frigidaire MFM-6D Service Manual

CONTROLS (MFM-7DTP)

SETTING THE CLOCK

When the oven is first plugged in, the display will flash ":0" and a tone will sound. If the AC power ever goes
off, the display will flash ":0" when the power comes back on.
DO THIS...
TIME
1. Touch TIME pad.
1 2 3
2. Enter the correct time of day
by touching the numbers in
sequence.
TIME
3. Touch AM/PM pad.
TIME
4. Touch TIME pad.
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the TIME pad and re-enter the time.
13
THIS HAPPENS...
Defrost
(Low)
AM
0
Defrost
(Low)
AM
Defrost
(Low)
AM
The colon starts blinking.
If you selected 12 hour clock system, this digital clock allows you to set from 1:00
to 12:59.
If you selected 24 hour clock system, this digital clock allows you to set from 0:00
to 23:59.
If the clock (or display) shows any abnormality, unplug the oven from the AC
outlet. Plug it in again and then reset the clock.
Cook Cook
(Med) (High) Lock Time
PM No Oz Alarm On
Cook Cook
(Med) (High) Lock Time
PM No Oz Alarm On
Cook Cook
(Med) (High) Lock Time
PM No Oz Alarm On
This is a 12 hour clock system.
If you touch TIME pad once
more, the display will show 24H.
NOTE:
If you select 24H system,
AM/PM bar segment will
be off.
Touch AM/PM to change desired
indicator.