Selecting the optical audio output format
You can select the optical audio output format when you connect a
®
Dolby
TV's Digital Audio Out terminal.
Audio Format
1
Press the MENU button.
2
Select Sound > Digital Audio Output > Audio Format and press
the OK button.
3
Press the p / q (arrow) buttons to select Auto or PCM.
4
Press the EXIT button.
Audio Delay
1
Press the MENU button.
2
Select Sound > Digital Audio Output > Audio Delay and press the
OK button.
3
Press the p / q (arrow) buttons to select Auto or Manual.
Auto:
Manual: You can manually adjust the audio signal timing to meet
4
Press the EXIT button.
Digital and/or DTS
This mode automatically adjusts the audio timing to meet
the video timing.
The time lag might be large between the image and sound
depending on the connected equipment (amplifier etc.). In
that case, select Manual.
the video signal timing.
Picture and Sound Controls
Adjusting the audio
®
decoder or other digital audio systems to the
121