Engine Oil - KSR Moto TR 125 User Manual

Table of Contents

Advertisement

Engine oil

The oil level should be measured
between the upper and the lower li-
mit on the inspection glas (1) on the
right side of the engine. To check
the engine oil place the motorcyc-
le in an upright position on a level
surface.
2
1
Open the oil ll cap (2) to ll the
recommended oil to the level
between the upper and the lower li-
mit. f the engine is cold the oil level
should be visible near the lower
level. f the engine is warm the level
20
should be visible at the upper limit.
Add engine oil if necessary.
Recommended engine oil:
SAE 10W-40
Castrol Power 1 4T 10W-40
Capacity is 1.2L
WARNING
!
Never attempt to remove the
operation. The heated oil could
spout out. Wait until the oil cools
down.
Engine oil replacement
1. Start the engine and warm it up
for several minutes.
2. Place the vehicle on even
survace and hold it in upright
position.
3. Place a suitable container under
the engine.
4. Remove the oil drain bolt (3) and
OPERATION INSTRUMENTS
clean the magnet from chips.
. Remove the 3 screws (4) of the
oil
lter cover.
Filter.
. Remove the the oil strainer ( )
screw. Blow up the strainer.
3
epollute the old
4
3

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TR 125 and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF