Specifications - Hitachi PDA-100K Technical Data And Service Manual

Durable bearing of the gear cover spindle
The bearing of the gear cover spindle was changed from the metal bearing to the needle bearing to increase
the service life and durability.
Low gear noise
The gear fastening method is changed from the conventional press-fitting method to the new method. The
gear is fastened to the spindle by a woodruff key keeping a proper clearance to reduce the variations in gear
noise level to the minimum level.

5. SPECIFICATIONS

Item
Depressed
Dimensions
center
wheel
Max. peripheral speed
Power source
Voltage, current and power input
Rotation speed (no-load)
Type of motor
Type of switch
Enclosure
Housing
Tail cover
Gear cover
Packing gland
1
Net: *
Weight
Gross:
Packaging
Standard accessories*
1
* : Net weight excludes cord, depressed center wheel, wheel nut, wheel washer and wheel guard.
* 2 : Standard accessories are subject to change without prior notice.
Model
O.D. 100 mm (4") x Thickness 6 mm (1/4")
Offset amount: 4 mm (5/32")
4,300 m/min (14,100 ft/min, 72 m/s)
AC single phase 50 or 60 Hz
Voltage (V)
110
220
230
240
12,000/min
AC single-phase commutator motor
Snap switch
Aluminum alloy die casting (metallic
silver) and glassfiber reinforced
polyamide resin (green)
Glassfiber reinforced polyamide resin (black)
Aluminum alloy die casting (metallic silver)
Aluminum alloy die casting
Corrugated cardboard box
2
Depressed center wheel [Outer dia.100 mm (4") ] ................. 1
Wrench ................................................................................... 1
PDA-100K
x I.D. 16 mm (5/8")
Current (A)
6.7
3.3
3.2
3.1
1.5 kg (3.3 lbs.)
2.5 kg (5.5 lbs.)
--- 5 ---
G 10SK3
Power input (W)
705
Glassfiber reinforced polyamide
resin (green)
1.4 kg (3.1 lbs.)
2.4 kg (5.3 lbs.)