1. Manuals
  2. Brands
  3. Dynamix Manuals
  4. Gateway
  5. 2FXS/2FXO-B
  6. User manual

Dynamix 2FXS/2FXO-B User Manual

Fxso gateway (h.323)
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
D
y
n
a
m
i
x
D
W
2
F
X
S
/
2
F
X
O
D
y
n
a
m
i
x
D
W
2
F
X
S
/
2
F
X
O
F
X
S
O
G
a
t
e
w
a
y
(
H
.
3
2
3
)
F
X
S
O
G
a
t
e
w
a
y
(
H
.
3
2
3
)
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2FXS/2FXO-B and is the answer not in the manual?

Questions and answers

Related Manuals for Dynamix 2FXS/2FXO-B

Summary of Contents for Dynamix 2FXS/2FXO-B

  • Page 1 User Manual...

  • Page 2: Table Of Contents

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual STEPS IN CONFIGURATION .................. 3 1. START UP ........................ 4 1.1 I ..................... 4 NTRODUCTION 1.2 F ................5 EATURES AND SPECIFICATION 1.3 A ................7 CCESSORIES AND EQUIPMENT 1.4 A ......................8 PPEARANCE 2.
  • Page 3 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.16 RTP P .............. 62 AYLOAD ONFIGURATION 3.17 V ................63 ERSION AND NFORMATION 3.18 P ......................64 ASSWORD 3.19 ROM U ....................65 PGRADE 3.20 F ....................69 LASH LEAN 3.21 C ......................70 OMMIT 3.22 R...
  • Page 4 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 4.2.25 [rom] ....................... 118 4.2.26 [passwd]....................119...

  • Page 5: Steps In Configuration

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Steps in configuration To check out the peripheral equipments and STEP 1 understand the feature of this gateway. Please Start Up read this step very carefully before starting the configuring. Connecting the gateway and computer to start configuring by WEB GUI.

  • Page 6: Start Up

    1. Start Up 1.1 Introduction Dynamix DW – 2 FXS/2 FXO gateway provides voice/fax service over IP network with H.323 v3 protocol. By connecting to your existing ADSL or cable modem service, which allows the use of a single, network for voice and fax services with consequent saving in network infrastructure and greatly reduced telephone charges.

  • Page 7: Features And Specification

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 1.2 Features and specification Features ITU-T H.323 v2/v3/v4 compliance Automatically Dial Path Selection (IP or PSTN) PSTN Line switch to telephone set when power is failure PPPoE support Behind NAT router or IP sharing device...
  • Page 8 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual FXS Features 2-wire loop start Programmable On-Hook voltage, Ring voltage/Cadence/Frequency, Loop current Line polarity reversal generation FXO Features 2-wire loop start Support auto-attendant (Tone or voice greeting) PSTN polarity reversal detection Provide 2 dial tone to PSTN...

  • Page 9: Accessories And Equipment

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 1.3 Accessories and equipment The voice gateway in 2/4 FXS ports models and two RJ-45 connector (WAN and LAN). The AC adapter. The CD of user manual. The connection cable in RS-232 interface.

  • Page 10: Appearance

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 1.4 Appearance Front panel: The LED lights provide related system messages of the gateway. Dynamix DW-2FXS/2FXO Power: Light on means Gateway is power on, and vice versa. TEL: Light on means the line is in use (off-hook), and vice versa.
  • Page 11 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 2. ACT- LED light on and flash when Ethernet data is being transmitted received. Back panel: Dynamix DW-2FXS/2FXO 1. Ethernet Port LAN/WAN: 10/100 Base-T; RJ-45 socket, complied with ETHERNET 10/100base-T. The pin-out is as following:...
  • Page 12 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual PINOUTS Pin Name Dir Description Receive Transmit System 3. TEL: RJ-11 connector, FXS interface is for connecting the analog phone sets or trunk line of PABX. 4. LINE: RJ-11 connector, FXO interface is for connecting the extension line of PABX or PSTN Line.

  • Page 13: How To Setup And Connect Basically

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 2. How to Setup and Connect basically 2.1 System Requirement 1. One PC (a) Pentium 100 or above, 64 RAM, Windows 98 or above. (b) Ethernet card or COM port 2. One standard straightforward RS-232 cable (female connector to Gateway side).

  • Page 14: Ip Environment Setting

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 2.2 IP Environment Setting User must prepare a valid IP address, complied with IP Network, for Gateway’s proper operation. For testing the validation of chosen IP address, using the same IP configuration in other PC or Notebook, and then try to connect to Public Internet (go to well-known website, receive Internet mail, or ping a specific public IP address).
  • Page 15 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 2.1: Network Configuration Select the Property of the LAN card. Setup the ip address, subnet mask and default gateway as below: Figure 2.2: Configure the network Click OK after you finished the network setup.

  • Page 16: Network Configurations In Your Gateway

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual The default ip address, netmask and default gateway address of the gateway is 10.1.1.3, 255.255.0.0, 10.1.1.254. 2.3 Network configurations in your gateway Key in the ip address of the gateway (http://10.1.1.3) with the browser After key in the ip address, you have to enter the user name and password to enter the WEB configuration.
  • Page 17 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 2.3: Login the username and password You will enter the main page of the configuration after key in the login name and password correctly: Figure 2.4: The main WEB configuration...

  • Page 18: Static Ip Address

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Press the Network Interface to configure the networking of your gateway: Figure 2.5: The Network Interface 2.3.1 Static ip address Please get the correct ip address, netmask and default gateway address from your ISP first. Press the OK button if you finished.
  • Page 19 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 2.5: Configure the static ip address Press the commit if you finish the configuration. Figure 2.6: Commit the data Press the reboot if you want the configuration executed.

  • Page 20: Dhcp Mode

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 2.7: Reboot the system 2.3.2 DHCP mode Change to the DHCP mode if you are using the cable modem or DHCP server.

  • Page 21: Pppoe Mode

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 2.8: Enable the DHCP function Please commit the data and reboot the machine after you enable the DHCP function. 2.3.3 PPPoE mode Chang the PPPoE mode in the IP mode table.
  • Page 22 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 2.9: Chage to PPPoE mode Please commit the data and reboot the machine after you finished the configuration of PPPoE. Figure 2.10: Enter the PPPoE connection info...

  • Page 23: Making A Voip Call

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 2.4 Making a VoIP Call There are two modes that you could configure the gateway for making VoIP calls. One is the Peer-to-Peer mode, another is GK routed mode. The configurations and functions are different. Please make sure about the mode you want and follow up the step to configure your gateway.
  • Page 24 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 2.11: Press OK to save the data Enter the Phone Book configuration table and configure the name, ip address and phone number of the destination. Figure 2.12: Phone Book...
  • Page 25 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Example Figure 2.13: The example of Phone Book configuration The name of the destination: test The E164 number (phone number) of the destination: 123 The ip address of the destination: 10.1.1.100 The call signal port of the destination: 1720 (The port will be 1720 if you don’...
  • Page 26 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 2.14: To show the Phone Book record Phone Book is only for the Peer-to-Peer mode. Fifty index support. The application in the drop and insert function Input (E164) Drop Insert Output Disable Disable...

  • Page 27: Configure The Gateway Into The Gk Routed Mode

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 2.4.2 Configure the gateway into the GK routed mode Enter the H323 Configuration table and change the mode from Peer-to-Peer to GK routed. To change the GK information from your service provider (Ex: The Gatekeeper IP, Registered Prefix and Registered Alias).

  • Page 28: The Type In Gk Routed Mode

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 2.4.2.1 The type in GK routed mode There are two types in the GK routed mode you could choose. One is Gateway type and another is Terminal type. There are some different functions, applications and configurations between the Gateway type and Terminal type.
  • Page 29 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Example – Gateway type Figure 2.17: Gateway Type configuration The prefix number is necessary if you configure it to be a gateway. The number of ports must be followed the prefix number. Example – Terminal type...
  • Page 30 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 2.18: Terminal Type configuration The prefix number is only for the gateway type and the number of ports could be configured in the different numbers.

  • Page 31: Advanced

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3. Advanced There are too many advanced commands for the advanced users. The following chapters are based on the application layer. Please get the info what you need. If you need the command, please watching the chapter of Command Line Interface.
  • Page 32 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual The LAN IP Address of User’s PC can be set as DHCP client in order to gain a valid one. Another IP Address for Gateway must be set as an fixed one in order for that IP Sharing device pass forwarding the relevant information from WAN to LAN.
  • Page 33 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 3.2: Enable the ip sharing function 1. Fixed IP – Please put the ip address of the ip sharing device in the IP Sharing Server Address table. 2. Dynamic IP – Just leave it if the IP sharing device is using PPPoE or DHCP protocol to connect with the internet.
  • Page 34 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual IP Change Function: The ip address of the IP Sharing Server Address will use what you configured in that table if you disable the IP Change function. It supports the static ip address. If user is using the dynamic ip address, this function has to be enabled.

  • Page 35: Network Interface

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.2 Network Interface User could configure the networking environment in this web page or change some default setting for networking. Please get more info from the following description. (see figure 3.4) Figure 3.4: Network Interface IP Mode –...
  • Page 36 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual SNTP – Enable the SNTP server registering function if user wants to get the correct time from the Command Line Interface. SNTP Server Address – Enter the correct ip address of the SNTP server or get the incorrect time from the Command Line Interface.

  • Page 37: H323 Configuration

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.3 H323 Configuration This page could support user configure the info about GK or change the mode from GK mode to Peer to Peer mode. Please get more detail info from below. (see figure 3.5) Figure 3.5: Network Interface...
  • Page 38 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Peer-to-Peer mode only. Gateway Type – Pick up the type for gateway. Support the GK mode only. Gateway : Could support one-stage-dialing function. Terminal : Couldn’t support one-stage-dialing function. Registered Prefix – The phone number for the GK registering.
  • Page 39 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual the GK mode only. From 1024 to 65535. H225 RAS Port – The RRQ sending port of this gateway. Support the GK mode only. From 1024 to 65535. H225 Call Signal Port – The Call Signal Port sending of this gateway.

  • Page 40: Line

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.4 Line The Line configuration will show the status of the registrations and the ports. It includes the hunt group, hotline, and no answer forward configuration. Press the Line configuration button to enter configuration table (see figure 3.6) Figure 3.6: Line Configuration...
  • Page 41 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Registration – To show the gateway registered on the GK or not. Status – To show the port is busy or ready.

  • Page 42: System Configuration

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.5 System Configuration Figure 3.7: System Configuration Keypad Type – User could define the keypad for the DTMF sending. In-Band : The DTMF signal sending by RTP. Out-Band : The DTMF signal sending not by RTP. Including the H.245(Alpha), H.245(Signal), Q.931 and RFC 2833.
  • Page 43 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Ring Time – It for the ring detection from the PSTN. The ring detection will be failed if users configure it too long. Ring Before Answer – This will help the users to answer the calls from PSTN into this gateway quickly.
  • Page 44 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual FXO type – Users could configure all the calls need the 2 stage dialing or not. Normal : The 1 or 2 stage dialing will depend on the dialing plan from the users. If user dial the number of the FXO port, that will be the stage dialing.

  • Page 45: Voice Setting

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.6 Voice Setting Users could configure the voice codec or gain level in this web page. Please get more detail info from the following description. (see figure 3.8) Figure 3.8: Voice Setting Codec Priority – This could help users configure the codec priority for using.
  • Page 46 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Line4 (LINE 2) Volume – To configure the output gain (voice), input gain (input) and DTMF gain (DTMF) of the second FXO port. Echo Canceller – To enable or disable the echo cancellation function.

  • Page 47: Phone Pattern

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.7 Phone Pattern This WEB will show the tone generation value from this unit. Please don’t configure it if you got some correct value for sure. (see figure 3.9) Figure 3.9: Phone Setting Ring Cadence – TO configure the frequency and cadence for the local ring tone.

  • Page 48: Tone Setting

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.8 Tone Setting Users could configure the tone pattern of the gateway in this page. If the disconnect tone from PSTN side is match the one of the Busy tone table, the call will be dropped. (see figure 3.9) Figure 3.10: Phone Setting...

  • Page 49: Support Functions

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.9 Support Functions This gateway support the FAX over IP, fast start function and others function. Please enable or disable these in the Support WEB page. (see figure 3.10) Figure 3.11: Support Functions T.38 FAX – Enable this function to support the FAX function.

  • Page 50: Phone Book

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.10 Phone Book The Phone Book configuration is only support the gateway in Peer-to-Peer mode. Please refer the chapter 2 about the Peer-to-Peer mode. (see figure 3.11) Figure 3.12: Phone Book Index – The list number of the Phone Book.
  • Page 51 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Add Data – Press this button if users fill the entire information table above. Delete Date – If users want to delete the record from the table, enter the index number first and press this button. The record will be deleted.

  • Page 52: Prefix Configuration

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.11 Prefix Configuration The Prefix function is using the drop and insert function (see figure 3.8). Figure 3.13: Prefix Configuration Index – The list number of the Phone Book. Prefix – The prefix number of the whole numbers that could be into this gateway Drop –...
  • Page 53 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual There is an example about the configuration, please follow up these steps. Press the Prefix Configuration button to enter the configuration table (see figure 3.13) Enter the index number. Put the prefix numbers you will dial in the prefix table, enable (disable) the drop function and enter the numbers you want to insert (see figure 3.14)
  • Page 54 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Enable Press the Prefix Configuration button to reload the configuration table (see figure 3.15) Figure 3.15: Show the added table Please Commit it and Reboot the system if the configuration is finished.

  • Page 55: Routing Table

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.12 Routing Table Routing Table is a rule to define the destination of the calls you make. You could define the rules by the number you dial or by the ports. The Routing Table button will show you the configuration table.
  • Page 56 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 3.16: Routing Table Configuration Index – The list number of the Route Table. Default – For change the default setting. Users have to pick the direction for the default setting changed. Prefix – The prefix number for the dialed digits. The call will be followed this route table if the prefix number was matched.

  • Page 57: Change The Default Routing

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.12.1 Change the default routing Please follow up the steps if you want to change the default routing: Pick up the side for the incoming calls and define the destination of this side. Press the Change Default to save the data.

  • Page 58: Add A New Routing Table

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 3.18: The Default Setting Changed Please Commit it and Reboot the system if the configuration is finished. 3.12.2 Add a new Routing Table The default setting is changed after you press the Change Default button.
  • Page 59 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 3.18: The Default Setting Changed Press Add Data button to save the configuration and press the Routing Table button again to reload the configuration. Figure 3.19 New Special Routing...
  • Page 60 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual The explanation of figure 3.19 is as below: When the user dial 0 with the first digit of the numbers (from FXS side), or from FXO and IP side. And the numbers you dial is between 1 and 10 digits. If this call matches the rule, it will be transferred to the FXO port whose E164 number is 1002.

  • Page 61: Fxo Password

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.13 FXO Password You will get the IVR if you make calls from PSTN side or from IP side. The IVR will ask you the password you set, and you could make other calls to IP side or PSTN side if the password you type is correct.

  • Page 62: Ip Packet Tos

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.14 IP Packet ToS The Type of Service should be worked with the network router. The router will check all the packets if it support the TOS function. There is a field in the packet for the TOS value.

  • Page 63: Ddns Configuration

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.15 DDNS Configuration This version of firmware supports DDNS function. Before using this function, please have a DDNS account and some info from your DDNS server. Press the DDNS Configuration button to configure it. (see figure 3.22) Figure 3.22: DDNS Configuration...

  • Page 64: Rtp Payload Type Configuration

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.16 RTP Payload Type Configuration There are more types for the RTP Payload. This web page could support users define the Payload Type for some special payload. (see figure 3.23) Figure 3.23: RTP Payload Type Configuration RFC2833 Payload Type –...

  • Page 65: Version And Information

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.17 Version and Information Users could get more detail about the software version for all the parts in this web page. (see figure 3.24) Figure 3.24 Version and Information Boot Rom – The version of the Boot Rom layer.

  • Page 66: Password

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.18 Password There are two-login accounts in this unit. One is the account root another is administrator. The default setting for these two accounts are empty. Users could define the passwords for these two accounts. Please get more info from the following description.

  • Page 67: Rom Upgrade

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.19 ROM Upgrade User could update the firmware just by the web configuration interface. There are two types for the upgrading procedure. One is using the TFTP server, another is using the FTP server. Please follow the step to update the gateway firmware version.
  • Page 68 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual OK – Press the OK button if all the info above are correct. The unit will start to download the firmware file from the TFTP or FTP and write to the flash after the downloading.
  • Page 69 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 3.28: FTP information Press the OK button to start the upgrade procedure. Updating the firmware by the TFTP server Downloading the TFTP program from our web site and install it first. Executing the TFTP program before you want to use the TFTP upgrade method.
  • Page 70 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 3.29: ROM Upgrade for TFTP Key in the IP address of your TFTP server, pick up the file type for your upgrade file and the correct file name for upgrading. (see figure 3.30)

  • Page 71: Flash Clean

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Press the OK button to start the upgrade procedure. 3.20 Flash Clean Users could make all the configurations back to the default setting by this button. The password of the account and the networking configuration couldn’t be back to the default setting by this command.

  • Page 72: Commit

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.21 Commit This web page could save the configurations if users change some configurations. This is necessary for users change the configurations. (see figure 3.32) Figure 3.32: Commit...

  • Page 73: Reboot System

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 3.22 Reboot System This web page will restart the whole system. This is the necessary step for the changing the configurations and makes it executed. (see figure 3.33) Figure 3.33: Reboot System...

  • Page 74: Command List

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 4. Command List 4.1 Hyper Terminal Setting A terminal emulator is needed when using RS-232 port to configure Gateway. There are kinds of terminal emulator software. Here, we use Microsoft HyperTerminal to depict how to set up terminal emulator: Execute the Hyper Terminal program, and then the following windows will pop-up on the screen.
  • Page 75 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Figure 4.2: Edit the name of the connection After pressing OK button, the next window appears, and then chooses COM1/2 Port, which you are going to use. Figure 4.3: Pick up the right interface to use...
  • Page 76 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Configure the COM Port Properties as following: Bits per second: 9600 Flow control: None Figure 4.4: Configure the right Bps and control Press ‘OK’ button, and then start to configure Gateway.

  • Page 77: Command List

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 4.2 Command List 4.2.1 [help] Type help or man or ? to list all the available command. usr/config$ help help help/man/? [command] quit quit/exit/close debug show debug message reboot reboot local machine flash clean configuration from flash rom...

  • Page 78: Quit]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 4.2.2 [quit] Type quit will quit the Gateway configuration mode and turn back to login prompt (in console mode) or disconnect (in TELNET mode). usr/config$ quit Disconnecting... login: Note: It is recommended that type the “quit” command before you leave the console.

  • Page 79: Flash]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual usr/config$ reboot .Attached TCP/IP interface to cpm unit 0 Attaching interface lo0...done Hardware auto detect... Hardware Type : 1FXS + 1FXO HTTPD initialized... cmInitialize succeed! Ras port:1024 CallSignal port:1720 AC4804[0] is ok successful 1 4 Initialize OSS libraries...OK!

  • Page 80: Ifaddr]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual ----------------------------------------------------------------------------------------------- usr/config$ commit This may take a few seconds, please wait..Commit to flash memory ok! usr/config$ Note: Users shall use commit to save modified value, or they will not be activated after system reboot.
  • Page 81 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Note: Range of ip address setting (0.0.0.0 ~ 255.255.255.255). SNTP mode (0=no update, 1=specify server IP, 2=broadcast mode). Example: ifaddr -ip 210.59.163.202 -mask 255.255.255.0 –gate 210.59.163.254 ifaddr -sntp 1 210.59.163.254 ifaddr -ipsharing 1 210.59.163.254 ifaddr –ipchange 1...

  • Page 82: Time]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual -ipchange If the unit is behind the IP sharing device and the IP address for the WAN port of that IP sharing is using the dynamic IP address. This function has to be enabled.

  • Page 83: Sysconf]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual ----192.168.1.254 PING Statistics---- 4 packets transmitted, 4 packets received, 0% packet loss round-trip (ms) min/avg/max = 0/1/5 usr/config$ 4.2.10 [sysconf] This command displays system information and configurations. --------------------------------------------------------------------------------------------- usr/config$ sysconf System information and configuration...
  • Page 84 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual -gwprefix Drop gateway prefix when call from IP(Keep:0/Drop:1). -hwtype Hardware type.(Auto:0 / 1FXS+1FXO:1 / 2FXS+2FXO:2) -ring The ring time for ring detection.(Uint:ms) -eod End of dial..(Enable:1 / Disable:0) -fxotype FXO type.(Normal:0 / Force 2...
  • Page 85 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Note: User can also define IP address here in P2P mode, once user press “#”, Gateway will call out this IP address. Note: “refixsw”, “prefixdisab”, “usrdefprefix” commands must work together. -codec set who is the one to determine voice codec during negotiation. 0 is caller will determine the codec, and 1 is mater will determine the codec.

  • Page 86: H323]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual file, user can select which hardware type is . ”0” means gateway will automatically detect the hardware type, “1” means the hardware type is 1FXS+1FXO, “2” means the hardware type is 2FXS+2FXO. Note: The default value is to auto detect hardware type. Usually it is not necessary to change this setting.
  • Page 87 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual -algk Second Gatekeeper ip address. (0.0.0.0 ~ 255.255.255.255) -gwtype Gateway Type (1 = Gateway and 0 = Terminal ). -dfgw Default Gateway ip address (0.0.0.0 ~ 255.255.255.255). -prefix Prefix number. -line1 Line 1(TEL 1) E.164 number.
  • Page 88 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Parameters Usage: -print print current h323 related settings -mode alternatives for gatekeeper or peer-to-peer mode (0=gatekeeper mode; 1=peer-to-peer mode). If users select gatekeeper mode, a valid gatekeeper is needed when Gateway is in operation.
  • Page 89 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Note: 1. This is for Dynamix DW-0202/H, for Dynamix DW-0101/H model, there are only line1 and line2 command. 2. Line1~Line4 number must follow the prefix number if device is configured as Gateway Type. For example, if prefix number is 999, then the line1 &...

  • Page 90: Line]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual discover a gatekeeper. Default value is 1718. -gkras to set default gatekeeper RAS port number. Default value, 1719, is well-known port for RAS communication. -h225 to specify H.225 RAS port number. -q931 to specify H.225 signal port number.
  • Page 91 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Parameter Usages: -print print out all current settings of line -config determine which line to configure -hunt set hunting group flag of each line. User can assign different hunt group number represent different hunt group. For example, if user assigns FXS TEL1 as hunt group 1, and FXS TEL2 as hunt group 2, they will be determined as 2 different groups.
  • Page 92 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Create a Hotline table with “line ” command. ------------------------------------------------------------------------------- usr/config$ pbook –add name asotel ip 10.1.1.1 e164 1001 usr/config$ line –config 1 hotline 1001 ------------------------------------------------------------------------------- In this example means: if user picks up phone set of FXS Line1, gateway will automatically dial out IP address of “1001”.

  • Page 93: Route]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual ------------------------------------------------------------------------------- usr/config$ line –config 1 forward 1002 ------------------------------------------------------------------------------- In this example means: if user calls in FXS Line and hasn’t been answered in forward time (please refer to [sysconf -forwardtime] command), gateway will automatically forward this call to phone number “1002”.
  • Page 94 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual FXO). Min digits.(0 ~ 255) Max digits.(0 ~ 255) hunt Hunt method for busy forward(NONE:0 / GROUP:1 / ALL:2) Example: route -add prefix 100 dst 0 e164 1001 min 1 max 3 hunt 1...
  • Page 95 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual means IP side, x means no determinate number. e164 destination e.164 number. This only need to be set when routed port is FXS TELs or FXO Lines to determine which port will this call be routed to.

  • Page 96: Prefix]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual forward to IP side. 4.2.14 [prefix] This command is for make rules for drop or insert prefix digits. ---------------------------------------------------------------------------------------------- usr/config$ prefix Prefix drop/insert information and configuration Usage: prefix -add [prefix number][drop number][insert digits] prefix -delete index...

  • Page 97: Pbook]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual drop prefix number on incoming call. insert set which digit to insert on incoming call. 4.2.15 [pbook] Phone Book function allows users to define their own numbers, which mapping to real IP address. It is effective only in peer-to-peer mode. When...
  • Page 98 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual pbook -delete 1 pbook -modify 1 name test e164 5678 ip 192.168.1.10 port 1720 drop 0 usr/config$ Parameter Usages: -print print out current contents of Phone Book. (pbook -print) Users can also add index number, from 1 to 100, to the parameter to show specific phone number.

  • Page 99: Voice]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual receive the number and find out if it is matched to its e164, including Line number in some particular device. 4.2.16 [voice] The voice command is associated with the audio setting information. There are four voice codecs supported by Gateway.
  • Page 100 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual G.729B G.729AB -volume Specify the following levels: voice volume (0~63, default: 28), input gain (0~63, default: 28), dtmf volume (0~31, default: 23), -nscng No sound compression and CNG. (G.723.1 only, On=1, Off=0). -echo Setting of echo canceller. (On=1, Off=0, per port basis).
  • Page 101 –priority g723 g729 g711u g711a (select four codecs, and g723 is the first choice) Note: (1) For Dynamix DW-0202/H there are 2 version of Application rom, please check version of Application rom (rom –print). If the version is 2fxso729.102, Dynamix DW-0202/H doesn’t have codec G.723.1.

  • Page 102: Support]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Note: be sure to know well the application before you change voice parameters because this might cause incompatibility. 4.2.17 [support] This command provides some extra functions that might be needed by users. ----------------------------------------------------------------------------------------------- usr/config$ support...

  • Page 103: Phone]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Parameter Usages: -print print current settings in support command. -t38 to switch ON/OFF (1 = ON; 0 = OFF) T.38 fax ability. When T.38 ability is ON, Gateway will automatically defer codec (G.723 or G.729 series) to T.38 when FAX signal is detected.
  • Page 104 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual usr/config$ phone Phone ringing , ringback tone , busy tone , dial tone setting and notes Usage: phone [-ring [freq ][ringON ][ringOFF ][ringLevel]] [-rbt [freqHi ][freqLo ][freqHiLev][freqLoLev] [Tone1ON][Tone1OFF][Tone2ON ][Tone2OFF ]] [-bt [freqHi ][freqLo ][freqHiLev][freqLoLev]...
  • Page 105 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual tone Tone ON/OFF : 0 ~ 8000 (Unit : ms) Example: phone -print rbt phone -ring 20 2000 4000 94 phone -rbt 480 440 8 8 2000 4000 2000 4000 phone -bt 620 480 8 8 500 500 500 500...

  • Page 106: Tone]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual -ring to set RING tone value. The played tone type, when Gateway is receiving a call. -rbt to set RingBackTone value The played tone type, when Gateway receives a Q.931 Alerting message. In condition that Gateway is the originate side.

  • Page 107: Fxopwd]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual [num] tone index. 1~4 is disconnect tone, 5~8 is remote ring back tone. For FXO ports Gateway must detect disconnect tone to determine when to disconnect the call, so user must set disconnect tone of PBX or PSTN network connected to FXO ports.

  • Page 108: Record]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual direction FXO direction(Out:0/In:1/Both:2). Example: fxopwd -add passwd 1234 direction 0 fxopwd -delete 1 fxopwd -modify 1 passwd 1234 direction 2 usr/config$ Parameter Usages: -print show all FXO password configuration -add add 1 set of FXO password...
  • Page 109 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual -tone Example: record -greeting greeting.100 record -askpin askpin.100 record -tone usr/config$ Parameter Usages: -greeting record greeting file. User must assign a file name for greeting, once record is finished, file recorded will be display in rom –print.
  • Page 110 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Write flash ok... Boot Rom : sdboot.200 Application Rom : fxso.100 DSP App : 48302ce3.300 DSP Kernel : 48302ck.300 DSP Test Code : 483cbit.bin Greetings : test.100 Ask Pin askpin.100 usr/config$ -askpin record askpin file. User must assign a file name for askpin file, once record is finished, file recorded will be display in rom –print.
  • Page 111 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual .................... Press (P) to play the voice or (W) to write to flash or (Q) to quit... Please wait a moment... Write flash ok... Boot Rom : sdboot.200 Application Rom : fxso.100 DSP App : 48302ce3.300 DSP Kernel : 48302ck.300...
  • Page 112 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Analyzing!! Please wait a moment…….. Frequency 1 : 480 Frequency 2 : 620 0.25sec on 0.25sec off usr/config$ Note: 1. Record ring back tone: user can use FXS Line1 to call FXO Line1, after hearing ring back tone, use this command to detect frequency of ring back tone.
  • Page 113 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual Pick up the phone and make sure the call is connect. Hang up the phone which is from PSTN side and Tel 1 port will get the disconnect tone. When you get the disconnect tone from the phone set of the Tel 1 port, press <R>...
  • Page 114 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual (Put this value in to the tone table) tone –print Disconnect tone 1 paramter Frequency high : 620 frequency low : 480 frequency high level frequency low level Tone1 on : 25 Tone1 off...
  • Page 115 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual frequency low : 481 frequency high level frequency low level Tone1 on : 25 Tone1 off : 25 Tone2 on : 50 Tone2 off : 50 (Confirm the values is correct or not) (Key in the commit and reboot command if you finish the procedures as above)
  • Page 116 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual a singal frequency) tone –print Disconnect tone 1 paramter Frequency high : 620 frequency low : 480 frequency high level frequency low level Tone1 on : 25 Tone1 off : 25 Tone2 on : 1023...

  • Page 117: Tos]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual frequency high level frequency low level Tone1 on : 25 Tone1 off : 25 Tone2 on : 50 Tone2 off : 50 (Confirm the values is correct or not) (Key in the commit and reboot command if you finish the procedures as above) 4.2.22 [tos]...

  • Page 118: Ddns]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 4.2.23 [ddns] The dynamic DNS service information and configuration ----------------------------------------------------------------------------------------------- usr/config$ ddns The dynamic DNS service information and configuration Usage: ddns [-print] ddns [-enable 0/1] ddns [-serve Address] [-hostname Name] [-id ID] [-passwd Password]...

  • Page 119: Pt]

    Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual ddns -force 11.22.33.44 Parameter Usages: -enable enable the DDNS function -server enter the server address of thr DDNS server you use -hostname enter the domain name address which you get from the DDNS server...
  • Page 120 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual 4.2.25 [rom] ROM file information and firmware upgrade function. ----------------------------------------------------------------------------------------------- usr/config$ rom ROM files updating commands Usage: rom [-print][-app][-boot][-dsptest][-dspcore][-dspapp][-greet][-askpin] -s TFTP/FTP server ip -f filename rom -print -print show versions of rom files. (optional)
  • Page 121 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual -print show versions of all rom files -app, boot, boot2m, dsptest, dspcore, dspapp, greeting, askpin to update main Application program code, Boot code, DSP testing code, DSP kernel code, DSP application code, greeting file, askpin file.
  • Page 122 Dynamix DW-2FXS/2FXO Gateway (H.323) User Manual “administrator” have the same authorization, except some commands that can be executed by “root” only – “passwd –clean”, “rom –boot”, ”rom –bot2m” and “flash –clean”.

Table of Contents