Specifications; Applications; Charging Method - Hitachi UC 18YRSL Safety Instructions And Instruction Manual

English

SPECIFICATIONS

Model
Input power source
Charging time
Charger
Weight

APPLICATIONS

For charging the HITACHI batteries types BSL14 and BSL18 series.

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle, the pilot lamp will blink in red.
(At 1-second intervals).
8
UC18YRSL
Single phase: AC 120 V, 60 Hz
Approx. 25 minutes .......... BSL1815, BSL1815X
Approx. 45 minutes .......... BSL1430, BSL1830
Approx. 60 minutes .......... BSL1440, BSL1840
Charging voltage .............. DC 7.2 V – 18 V
Charging current .............. DC 3.5 A
1.3 lbs (0.6 kg)
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
WARNING:
Do not use the electrical cord if damaged. Have
it repaired immediately.