Blomberg Dishwasher Instruction Manual page 34

6. Press Confirmation key to store your
changes in the submenu.
7. "Stored!" will be displayed after you
press the Confirmation key.
8. If you press Function key without
making any changes in the
submenu, you will switch to the next
setting menu.
9. Select "Back to Prog. Menu" and
press Confirmation key to exit the
"Settings" menu.
Time Delay and Start / Pause
/ Cancel keys do not have any
function in "Settings" menu.
Pressing these keys has no effect.
Language
"Language" menu contains 10 different
language options in total.
Brightness
You can adjust screen brightness to a
level between 1 - 3.
Contrast
You can adjust screen contrast to a
level between 1 - 3.
Display mode
"Display mode" menu contains "Eco"
and "Normal" options. If you select
"Eco", your machine will decrease the
screen brightness automatically after
a while and save energy. If you select
"Normal", screen brightness will not be
changed.
Volume
You may enable the machine to warn
you audibly thanks to the "Volume"
setting.
Select one of the following levels:
0- Off
1- Medium
2- High
Water Hardness
You need to adjust the "Water
Hardness" level to one of the following
values that suits the properties of your
supply system.
1- Lime free,
2- Very little limy
3- Less limy
4- Mediocre limy
5- Limy
6- Very much limy
Melody
You can adjust melody to a level
between 1 - 4.
Factory Settings?
Proceed as indicated below to cancel
all your personal settings and restore
the factory settings:
1. Press Function and Time Delay
keys together for 3 seconds to
enter the "Settings Menu".
2. When you are in Main Menu,
press Function key repeatedly until
"Factory Settings?" appears on
display.
3. "Factory Settings" menu does not
have any submenus. Just press
Confirmation key to reset the
settings.
4. Turn off and on again your
machine with On / Off key after
"Stored!" appears on display.
When factory settings are restored,
settings will have the following values:
Language = Turkish
Brightness = 2
Contrast = 2
Display Mode = Normal
33 EN