Sanyo HVR-DX610 Instruction Manual page 24

9
Use [.../†] to select 'Auto Search'.
10
Search the real channel number by pressing [œ/√].
11
Select 'Fine Tune'. You can adjust the fine tuning.
12
Use [.../†] to select 'Store Channel'. Press [ENTER] to move to the
second level.
13
Use [.../†] to select program number to store and press [ENTER] to
confirm.
14
Use [.../†] to select 'Program Name'. Press [√] to move to the second
level. If your DVD Recorder+VCR is showing no station name or is
showing a station name incorrectly, you can correct this.
15
Either select the name from the stored list or you create the station
name and enter a 4-digit name. Change the letters with the [.../†],
move the next letter with the [œ/√].
• To save the 'Program Name' , you must set the 'Store Channel' again. Repeat the same procedure 12~13.
22
Initial Setup
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH-02
Fine Tune
Decoder N/A
Store Channel PR-01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move ...†
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH-02
Fine Tune
Decoder N/A
Store Channel PR-01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move ...†
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH-02
Fine Tune
Decoder N/A
Store Channel PR-01
Select Channel
Program Name P-01
To Store
Instructions
PR-01
Enter-Confirm Setup-Exit Move ...†
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH-02
Fine Tune
Decoder N/A
Store Channel PR-01
Edit Channel
Program Name P-01
Name
Instructions
P – 0 1
Enter-Confirm Setup-Exit Move ...†