Time And Date - D-Link DIR-600 User Manual

Section 3 - Configuration
This page allows you to edit the system time and Network Time Protocol (NTP). You can configure, update, and maintain the
correct time on the system clock, and configure Daylight Saving.
System Time:
Enter the correct year, month, day, and time.
Daylight Saving
Select the daylight saving offset if Daylight Saving time
Offset:
will be used.
Click the Apply Changes button to save the changes
and apply them.
State:
Select Enable to enable the NTP server.
Server:
Enter the name of the NTP server.
Server2: Enter the name of the second NTP server.
Interval: Enter the time period that you want the NTP server to
synchronize time with the devices on the network. The default value is one hour.
Time Zone:
Select the time zone you are in from the pulldown menu.
GMT Time:
This shows the current GMT (Greenwich Mean Time) time.
Click the Apply Changes button to save any changes made.
To start the NTP, click the Get GMT Time button to obtain the GMT time.
D-Link DIR-600 User Manual

Time and Date

43