Checking The Supplied Accessories; Using The Cd-Rom Manuals; Installing Projector Station For Network Presentation - Sony VPL-SW536C Quick Reference Manual

Checking the Supplied Accessories

RM-PJ8 Remote Commander (1)
Lithium battery (CR2025) (1)
The battery is already installed. Before
using the remote commander, remove the
insulation film.
AC power cord (1)
Quick Reference Manual (this manual) (1)
Operating Instructions (CD-ROM) (1)
Projector Station for Network Presentation
application (CD-ROM) (1)
IFU-PN200M Interactive Pen Device (main)
(1) (VPL-SW536C/SW526C only)
IFU-PN200S Interactive Pen Device (sub)
(1) (VPL-SW536C/SW526C only)
Size AAA (R03) manganese batteries (4)
(VPL-SW536C/SW526C only)
USB A-B cable (5m) (1) (1-846-133-11/
Sony) (VPL-SW536C/SW526C only)
Interactive Presentation Utility 2 application
(CD-ROM) (1) (VPL-SW536C/SW526C
only)

Using the CD-ROM Manuals

Insert the supplied CD-ROM into the
CD-ROM drive of your computer, and the
CD-ROM will start automatically in a few
moments. Select the Operating Instructions
you want to read. If the CD-ROM does not
start automatically, open the "index.htm"
file on the CD-ROM.
You must have Adobe Acrobat Reader 5.0
or higher installed in your computer to read
the Operating Instructions stored on the
CD-ROM.
Installing Projector Station
for Network Presentation
1
Close all running applications.
2
Insert the supplied CD-ROM into the
CD-ROM drive of the computer.
3
Open the CD-ROM and double-click
the .exe file.
When the message "User Account
Control" is displayed, click "Allow" or
"Yes."
4
Follow the on-screen instructions to
install the software.
Checking the Supplied Accessories
9
GB