Panasonic AG-HPD24P Operating Instructions Manual page 64

Item
Turns on and off closed caption signals in the first field output from
the SD SDI and analog composite output.
BLANK: Signals are forcibly blanked.
CC (F1)
THROUGH: Signals are not blanked.
BLANK
NOTE:
• In EE mode, the closed captions are output superimposed on
the input signal.
Turns on and off closed caption signals in the second field output
from the SD SDI and analog composite output.
BLANK: Signals are forcibly blanked.
CC (F2)
THROUGH: Signals are not blanked.
BLANK
NOTE:
• In EE mode, the closed captions are output superimposed on
the input signal.
Specifies whether or not the closed caption signal that is
superimposed on the SD SDI input signal will be recorded.
CC REC ON: A closed caption signal that is superimposed on an input
signal is recorded.
OFF: Not recorded. The EE output is also blanked.
Selects the compression method used during video recording.
DARK: Records video suppressing compression video
distortion that is generated by dark areas that are about 10
IRE (70 mV) or less.
COMPRESSION
NORMAL: Records using normal compression processing.
MODE
NOTE:
• This setting is available in DVCPRO HD 720p mode
recording.
Specifies whether or not WIDE data will be recorded when the
SETUP - SYSTEM - FORMAT menu setting is 480i or 576i.
WIDE SEL
WIDE: Recorded
NORMAL: Not recorded
Selects output method for analog composite signals.
OFF: Does not apply the setup to the output
SETUP
7.5 %: Applies 7.5 % setup to the output
Specifies whether or not EDH is superimposed on SDI OUT
signals.
EDH(SD)
ON: Signals are superimposed.
OFF: Signals are not superimposed.
Selects output connector to output digital audio and video.
In main mode
SDI: Output from the SDI connector
HDMI: Output from the HDMI connector
In 3D REC/PB mode and SYNC PB mode
SDI (S/S): Output from the SDI connector in a side-by-side
OUTPUT SEL format
DISCRETE L/R: Output from the SDI connector in a multicast
format
HDMI (S/S): Output from the HDMI connector in a side-by-side
format
HDMI (FP): Output from the HDMI connector in a framepacking
format
Selects output video for master side in playback modes other than
PLAY or STILL when OUTPUT SEL is set to DISCRETE L/R. Black
DISCRETE
output is used for the slave side.
BLACK
ON: Black output
OFF: Outputs video
64
Setup Menu: Menu items
Settings and brief function description
XX indicates factory default settings.
SYSTEM FREQ
indications
(Main)
59.94 Hz
59.94 Hz
59.94 Hz
59.94 Hz 50 Hz
59-23 Hz 60-24 Hz
59.94 Hz 50 Hz
59.94 Hz 23.98 Hz
59-23Hz
59.94 Hz 50 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
59-23Hz 60-24 Hz
59.94 Hz 50 Hz
23.98 Hz 24 Hz
Mode
2D
3D SYNC PB
M M
M M
M
M
M
M M M
M
M M M
M M