Table of Contents
Advertisement
Quick Start Manual
Product Description
The mini NVR was specially designed for network video surveillance system. It has embedded Linux
operating system which makes the system operation more stable; it has standard H.264 video
compression algorithms which achieve high definition, low bitrate and single-frame play video function.
The mini NVR is small, dimension 88mm*88mm*32mm, but with complete ports and function. It
supports Onvif, 4CH/ 8CH 720P or 1080P IP cameras input, preview and playback; P2P and mobile
phone controller; Mobile HDD, E-SATA hard disk cartridge and E-SATA HDD expansion. HDMI and
VGA output simultaneously. The power supply was made of standard 5V2A micro-mini USB port,
energy saving and environmental protection.
1.1 Declaration：
Thank you for purchasing our NVR. If you need any help, please feel free to contact us.
The manual apply to 8CH mini NVR and 4CH mini NVR
The manual will be updated according to the enhancement of product function. Description of
product or program will be improved or updated periodically. The updated stuff will be added in
new manual without prior notice. If any product description in manual not in conformity with the
real object, subject to the real object.
2 .1 Attentions:
The IP address of all devices in LAN can't conflict with each other.
The gate way should match with IP address, and setting up correctly.
The product supports external HDD only, including mobile HDD, hard-disk cartridge with E-SATA port.
We have tested following HDD brands and model numbers work with the mini NVR:
Seagate Backup Plus 1TB 2.5'' USB3.0 mobile HDD, Model No.: STBU1000300
Seagate Expansion 1TB 2.5'' USB3.0 mobile HDD, Model No.: STBX1000301
Seagate Expansion 2TB 3.5'' USB3.0 external HDD, Model No.: STBV2000300
Western Digital (WD) Elements 1TB 2.5'' USB3.0 mobile HDD, Model No.: WDBUZG0010BBK
NVR Quick Start Manual
Mini NVR
第 1 页 共 22 页
Advertisement
Table of Contents
Summary of Contents for Unifore 4CH Mini NVR
-
Page 1: Product Description
Thank you for purchasing our NVR. If you need any help, please feel free to contact us. The manual apply to 8CH mini NVR and 4CH mini NVR The manual will be updated according to the enhancement of product function. Description of product or program will be improved or updated periodically. -
Page 2: Technical Parameters
NVR Quick Start Manual 3.1 Technical Parameters 3.1.1 8CH mini NVR Model Number 8CH Mini NVR Operating System Embedded LINUX operating system Image Code Control Adjustable; variable bitstream and constant bitstream optional Dual Stream Each channel can set main stream and sub stream Video Standard 1080P(1920×1080)30fps/ 960P/(1280×960)/ 720P(1280×720)30fps Monitoring Image Quality 1080P(1920×1080)/ 960P/(1280×960)/ 720P(1280×720) - Page 3 Weight(without HDD) N.W.: 105g; With packing: 250g Outside Carton 30pcs/ carton; Dimension: 365mm×350mm×188mm; Weight: 8 Kg。 Installation Way Desktop Installation 3.1.2 4CH mini NVR Model Number 4CH Mini NVR Operating System Embedded LINUX operating system Image Code Control Adjustable; variable bit stream and constant bit stream optional...
- Page 4 NVR Quick Start Manual Ports ② 4×(1280*960)+sub[960*576]+1Ref.+4Play 4CH 960P IP Cameras ③ 4×(1920*1080)+sub[960*576]+4Ref.+1Play 4CH 1080P IP Cameras ④ 1×(1920*1080)+sub[960*576]+4Ref.+1Play 1CH 1080P IP Cameras ⑤ 4×(720*576) +sub[352*288]+4Ref.+4Play 4CH D1 IP Cameras Audio Input 4CH network audio input Video 1CH VGA + 1CH HDMI Output Network 1 RJ45,10M/100M self-adaptive LAN port...
- Page 5 NVR Quick Start Manual Connection Diagram 5.1 Device Operation 5.1.1 Power On Connect power and mobile HDD, and then switch on the power button (on the right side of NVR). The video output is default multi-screen mode after startup is completed. If the startup time is among the time of setting record, system will auto start timing video recording.
-
Page 6: System Login
NVR Quick Start Manual 5.1.2 System Login After normal booting, single-click icon， Power off: Click “Power off” button, the device will shutdown. Reboot: Click “Reboot” button, the device will reboot. Click “Login” button to login the system. User name: admin, password: blank by default; Lock: Click “[ ] Lock”, the menu will be locked. - Page 7 NVR Quick Start Manual 6.1 Network Setting Connect NVR with network cable to the LAN switch, After power on, click to enter setting menu, set NVR IP address, subnet mask, and gateway and so on. Then use PC to run ping command to check NVR IP has connected with LAN Notice: IP address might conflict with each other, please set the gateway correctly, or NVR might fail to work.
-
Page 8: Automatic Search
NVR Quick Start Manual A –Area is cameras IP address searching area——click Search to get the camera IP addresses in B- Area is camera IP address modification area——double click IP camera in A area, B area will show camera network data, some cameras can change IP address directly in B area C- Area is cameras channel setting area——according to the selection sequence in A zone, to sort the 1-36 channels image order. -
Page 9: Digital Zooming
NVR Quick Start Manual 【IP channel setting】, choose【drag to change channel sequence】 . Right Mouse to click Operation is same as 6.3.1. After dragging channel sequence, users are unnecessary to fill in username, password and IPC will reconnect in its new channel position. When dragging, 2 channels exchanged would lose image for a short while till reconnection. -
Page 10: Manual Capture
NVR Quick Start Manual 6.4 Manual Capture 【Capture】, it supports all channels manual Right click to bring main menu, click capturing. After capture, there is information to hint capturing is successful or failure or this channel does not support capture. The image of capture resolution is D1 by JPG format, and it is saved in special area, the recording file will not overlay it. -
Page 11: Schedule Record
NVR Quick Start Manual video & audio mode, or there is no audio when playback. 3) Resolution Ratio：NVR will get IP camera main stream and sub stream resolution automatically, when the image is not good, can adjust from here according to necessory. 4) Bitrate Type：set variable bit rate and constant bit rate 5）Bitrate: set the bit rate upper limit for coding main stream are 1080P: 6000kbps, 720P: 4000kbps ;... - Page 12 NVR Quick Start Manual video mask alarm, etc linkage, system will triger alarm video record of correspondent channels. When channel setting is same, users can click “copy to” to choose correspondent channels. Then click apply and set to save sucessfully. Notice: If NVR stop recording in a regular time, please check schedule record status, the schedule might be in wrong, please adjust them to manual record.
-
Page 13: Record Backup
NVR Quick Start Manual accurately to second. Please check 7.1.3【Record Backup】 7、 Mute playback audio forbiddened. 7.1.4 Record Backup Before back up,please make sure the hard disk has been saved with video. Playback Backup: click Back Up icon in area C of 7.2 Playback Preview Backup: Right click bring main menu, click 【Backup】to enter the backup interface, as right picture showsVideo backup best... -
Page 14: Hdd Setting
NVR Quick Start Manual You can capture also when you view the video, the captured photos are stored in the hard disc of that very day. 7.2.1 User Management Right mouse to Setting—User Management. Users can check current login users and add, delete, modify users as well as configuring user right. -
Page 15: System Maintenance
NVR Quick Start Manual Upgrade include:firmware upgrade,boot screen image upgrade,patch upgrade. Except USB memory upgrade, it also support upgrade by network. Note:when the NVR is upgrading,don’t perform any other operations or power off, otherwise NVR will fail to enter the system ,and have to send back to factory for repairing. After upgrading,the device need to be rebooted. - Page 16 NVR Quick Start Manual The operation of IE is same as in the local NVR. Remark: open the preview, click the right bottom to let it change to or right click to Open All , the red point represent recording , and click to set the stream and switch of main stream and sub stream.
- Page 17 NVR Quick Start Manual number, Minimum 1 channel and Maximum 32ch After added successfully, if the middle line color is blue in the rectangle icon, it means NVR online and can link with video data. 9.1.2 IE End Setting Open Website: www.goolink.org Click “Register”, Username, password, snapshot save dir and record video save dir setting randomly.
- Page 18 NVR Quick Start Manual Caution: if it says ID not exists when add it, pls contact our technician. After added successfully, click “Live”. Click NVR name in the left list and click randomly channels for preview. Attachment: NVR Malfunction & Elimination 1.
- Page 19 NVR Quick Start Manual accurate update files; Update Operation: Setting→System→Update, click “Browse”, choose U disk’s .update suffix update file in root catalog, click “update”, during updating, please do not cut off electricity or carry out other operation in case that update failure leads to repairing. 2.
- Page 20 NVR Quick Start Manual 3. Images cannot be all connected in full channel, image off or image sporadic 1） Stream data access exceeds NVR’s total network resource, 3M for main stream and 512K for sub stream recommended; 2） NVR firmware outdated and needs to be updated with optimized network master version 3）...
- Page 21 NVR Quick Start Manual WAN Access: Recommend to shut down NVR and close router’s UPNP, then do the port mapping. If open UPNP without NVR shut down, it may have mapping conflict and NVR UPNP is default to be closed. If users have static IP, it needs to map two rules in router, first is 5050-5053, related to NVR IP address;...
- Page 22 NVR Quick Start Manual 9. How to Decode for TV Wall? Via CMS central monitor software Client, user can configure decoder, which can decode NVR or ONVIF protocol’s IP cameras. For detail, please carefully view it on Decode CD disk. 第...
Need help?
Do you have a question about the 4CH Mini NVR and is the answer not in the manual?
Questions and answers