Related Manuals for RBH Sound SX-10
Summary of Contents for RBH Sound SX-10
- Page 1 SIGNATURE SX SERIES SPEAKERS AND SUBWOOFERS O w n e r ’ s M a n u a l...
-
Page 3: Break-In Period
Introduction Congratulations on your purchase of Signature SX Series freestanding speakers and/or subwoofer! Your speakers are the result of many years of research and development dedicated to producing high quality products for home audio and audio/video systems. This manual contains features, setup recommendations and specifications for the Signature SX Series freestanding speakers. - Page 4 Features (continued) performance of reference-grade components. The tweeter has a larger motor structure, increased power handling and improved resolution. The aluminum cone woofers that give the Signature SX Series its great bass to upper-midrange performance are replaced with an even more advanced aluminum cone woofer featuring a fixed-position phase plug. The addition of this phase plug extends frequency response and increases power handling, resulting in increased sonic clarity.
- Page 5 Room Setup Suggestions In order to obtain the best possible sound from your speaker system, it is important to determine where the speakers will sound best in your listening room. Room reflections from the floor, ceiling and side walls influence the balance, imaging and overall sonic quality at the listening position.
- Page 6 Room Setup Suggestions (continued) IMPORTANT NOTICE REGARDING BASS MANAGEMENT: It is important the signal being sent to the subwoofer be a non-boosted or “flat” signal. To be sure of this, check the settings on your receiver or processor to make sure any “bass boost”, “super bass”...
- Page 7 Subwoofer Safety Instructions The lightning flash with the arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
- Page 8 Subwoofer Amplifier Controls and Setup (continued) 2. Volume/Gain Control: The volume/level control should be at the minimum setting (all the way counter-clockwise) before plugging the subwoofer into an AC wall socket. Once plugged in, turn the level control up one quarter of a turn (9 o’clock position) for an initial setting.
-
Page 9: Subwoofer Amplifier
Subwoofer Amplifier Controls and Setup (continued) 11. Fuse Access: This is the power fuse access. WARNING! In the event the fuse must be replaced, the replacement fuse must match exactly the original fuse value. If the replacement fuse is not of the same value, damage to the Subwoofer Amplifier may result. - Page 10 Tower Speaker Outrigger Installation These attractive tower speaker outriggers produce a wider support base for the Signature SX Series tower speakers creating stability and are ideal when placing speakers on a thickly carpeted floor. Package contents include: Top Cap Nut 4 each outrigger plates Outrigger Plate 4 metal spike feet...
-
Page 11: Specifications
Specifications Model: SX-10 SX-10/R SX-1010N System Type: Powered Subwoofer Powered Subwoofer Passive Subwoofer Frequency Response: 29Hz-150Hz (±3dB) 26Hz-100Hz (±3dB) 24Hz-180Hz ±3dB Sensitivity: 90dB ( 2.83V @ 1 Meter) Recommended/ 300 Watt 350 Watt 200-400 Watts Rated Power: Amplifier Included Amplifier Included Woofer(s): (1) 10”... - Page 12 Specifications (continued) Model: SX-1010N/R SX-1010P SX-1010P/R System Type: Passive Subwoofer Powered Subwoofer Powered Subwoofer Frequency Response: 22Hz-100Hz ±3dB 22Hz-150Hz ±3dB 20Hz-100Hz ±3dB Sensitivity: 90dB Recommended/ 200-500 Watts 350 Watt Amplifier 500 Watt Amplifier Rated Power: Included Included Woofer(s): (2) 10” (254mm) (2) 10”...
- Page 13 Specifications (continued) Model: SX-12 SX-12/R SX-441C System Type: Powered Subwoofer Powered Subwoofer Center Channel Speaker Frequency Response: 27Hz-150Hz ±3dB 24Hz-100Hz ±3dB 60Hz-20kHz ±3dB Sensitivity: 89dB Recommended/ 350 Watt 400 Watt 75-150 Watts Rated Power: Amplifier Included Amplifier Included Woofer(s): (1) 12” (305mm) (1) 12”...
- Page 14 Specifications (continued) Model: SX-441C/R SX-44 SX-44/R System Type: Center Channel On-wall Surround On-wall Surround Speaker Speaker Speaker Frequency Response: 65Hz-20kHz ±3dB 70Hz-20kHz ±3dB 70Hz-20kHz ±3dB Sensitivity: 89dB 88dB 88dB Recommended/ 75-150 Watts 75-150 Watts 75-150 Watts Rated Power: Woofer(s): (2) 4” (102mm) (2) 4”...
- Page 15 Specifications (continued) Model: SX-61 SX-61/R SX-6100C System Type: Bookshelf Speaker Bookshelf Speaker Dedicated Center Channel Speaker Frequency Response: 55Hz-20kHz ±3dB 55Hz-20kHz ±3dB 50Hz-20kHz ±3dB Sensitivity: 87dB 87dB 92dB Recommended/ 75-150 Watts 75-150 Watts 75-450 Watts Rated Power: Woofer(s): (1) 6½” (165mm) (1) 6½”...
- Page 16 Specifications (continued) Model: SX-6100C/R SX-6300 SX-6300/R System Type: Dedicated Center Tower Speaker Tower Speaker Channel Speaker Frequency Response: 50Hz-20kHz ±3dB 35Hz-20kHz ±3dB 35Hz-20kHz ±3dB Sensitivity: 92dB 88dB 88dB Recommended/ 75-450 Watts 100-300 Watts 100-300 Watts Rated Power: Woofer(s): (4) 6½” (165mm) (3) 6½”...
- Page 17 Specifications (continued) Model: SX-661 SX-661/R SX-661C System Type: L/R Speaker (Left / L/R Speaker (Left / Dedicated Center Right Main Speaker) Right Main Speaker) Channel Speaker Frequency Response: 55Hz-20kHz ±3dB 55Hz-20kHz ±3dB 55Hz-20kHz ±3dB Sensitivity: 90dB 90dB 90dB Recommended/ 75-200 Watts 75-200 Watts 75-200 Watts Rated Power:...
- Page 18 Specifications (continued) Model: SX-661C/R SX-8300 SX-8300/R System Type: Dedicated Center 3-way Tower Front 3-way Tower Front Main Channel Speaker Main or Rear Speakers or Rear Speakers Frequency Response: 55Hz-20kHz ±3dB 25Hz-20kHz ±3dB 25Hz-20kHz ±3dB Sensitivity: 90dB 91dB 91dB Recommended/ 75-200 Watts 100-500 Watts 100-500 Watts Rated Power:...
- Page 19 Specifications (continued) Model: SX-88 SX-T1 SX-T1/R System Type: Powered Subwoofer L/R Front Main Speaker L/R Front Main Speaker Frequency Response: 35Hz-180Hz ±3dB 50Hz-20kHz ±3dB 50Hz-20kHz ±3dB Sensitivity: 92dB 92dB Recommended/ 300 Watt Amplifier 100-500 Watts 100-500 Watts Rated Power: Included Woofer(s): (2) 8”...
- Page 20 Specifications (continued) Model: SX-T2 SX-T2/R SX-T3 System Type: L/R Front Main Speaker L/R Front Main Speaker L/R Front Main Speaker Frequency Response: 22Hz-20kHz ±3dB 20Hz-20kHz ±3dB 22Hz-20kHz ±3dB Sensitivity: 92dB 92dB 92dB Recommended/ 100-500 Watts 100-500 Watts 100-500 Watts Rated Power: Woofer(s): (2) 10”...
- Page 21 Specifications (continued) Model: SX-T3/R System Type: L/R Front Main Speaker Frequency Response: 20Hz-20kHz ±3dB Sensitivity: 92dB Recommended/ 100-500 Watts Rated Power: Woofer(s): (4) 10” (254mm) Aluminum Subwoofers (4) 6½” (165mm) Reference Aluminum Cone Woofers Tweeter(s): (3) 1.1” (28mm) Reference Silk Dome Tweeters Tweeter Protection: Crossover Frequency:...
- Page 22 Amplifier fuse might be blown. Replace fuse (if fuse is not readily accessible, consult your authorized RBH Sound dealer). Performance Crossover frequency is not Adjust the crossover frequency by is less than adjusted correctly.
-
Page 24: Warranty
382 Marshall Way, Layton, Utah • USA • 84041 Toll Free: (800) 543-2205 • Fax: (801) 543-3300 www.rbhsound.com It is RBH Sound policy to continuously incorporate improvements into products; all specifications are subject to change without notice. Copyright © 2011 RBH Sound. All Rights Reserved.
Need help?
Do you have a question about the SX-10 and is the answer not in the manual?
Questions and answers