Table of Contents
Related Manuals for EPOS Epic 1
Summary of Contents for EPOS Epic 1
-
Page 1: User Manual
Designed and engineered in the U.K. User Manual EPOS LIMITED 12 Avebury Court Mark Road Hemel Hempstead Herts HP2 7TA England Telephone: +44 1442 260146 Fax: +44 870 622 0846 E-mail: info@epos-acoustics.com www.epos-acoustics.com... -
Page 2: Power Requirements
Do not make or break loudspeaker connections to the amplifier when it is turned on. POSITIONING Epos loudspeakers are designed to be positioned as specified. Space should be left behind the loudspeakers to allow proper operation of rear firing reflex ports and to ensure establishment of good stereo image depth. -
Page 3: Quick Connections
Floor-standing loudspeakers should also be coupled to the floor using the carpet piercing spikes supplied. This will help preserve the outstanding mid-band clarity which is a hallmark of Epos loudspeakers. Epos has designed its own stands. -
Page 4: Speaker Amplifier
Bi-wiring involves the use of two pairs of speaker cables between your loudspeakers and amplifier. If you wish to bi-wire your EPIC 1/ EPIC 2/EPIC speakers, it is essential that you first unscrew all the binding posts and remove the metal links that join them together. - Page 5 Store the plain front panel for later use carefully in the carton provided. Press the protective grille into the aperture, with the EPOS logo on the front at the bottom and line up the pegs. Press the grille panel until it is level with the frame that runs around the sides of the cabinet.
-
Page 6: Specification
20 - 100 Watts Positioning Not less than 10 cm (4”) from rear wall Tweeter Epos 25mm soft dome with high-temperature voice coil, ferrofluid cooling and neodymium magnet system. Magnetically shielded Bass/Midrange Driver Epos 150mm with 25mm high-temperature voice coil and polypropylene cone. - Page 7 20 - 120 Watts Positioning Not less than 10 cm (4”) from rear wall Tweeter Epos 25mm soft dome with high-temperature voice coil, ferrofluid cooling and neodymium magnet system. Magnetically shielded Bass/Midrange Driver Epos 179mm with 25mm high-temperature voice coil and polypropylene cone.
- Page 8 20 - 200 Watts Positioning Not less than 10 cm (4”) from rear wall Tweeter Epos 25mm soft dome with high-temperature voice coil, ferrofluid cooling and neodymium magnet system. Magnetically shielded Bass & Bass/Midrange Drivers Epos 179mm with 25mm high-temperature voice coil and polypropylene cone.
Need help?
Do you have a question about the Epic 1 and is the answer not in the manual?
Questions and answers