Kenwood DDX6015BTR Instruction Manual page 31

BLUETOOTH BLUETOOTH
Pairing a Bluetooth device using a PIN code (for
Bluetooth 2.0)
1
Display the <Bluetooth Setup> screen.
On the <TOP MENU> screen:
• Press [ ] repeatedly to change the page on
the <System> menu screen.
2
Change the PIN code.
• If you skip changing the PIN code, go to step
3.
• The PIN code is initially set to "0000".
• The maximum number of digits in the PIN
code is 16.
• Press [Clear] to delete the last entry.
3
Search the unit ("DDX ****") from your
Bluetooth device.
4
Select the unit ("DDX ****") for your
Bluetooth device.
• If the PIN code is required, enter "0000"
(initial).
OK
When pairing is complete, the device is listed on
<Paired Device List>.
• To use the paired device, connect the device
on <Paired Device List>. (Page 32)
ENGLISH 31