Factory Default Settings; Reverting To Factory Settings - Northern Telecom Unity Two-Line User Manual

22 / Basic Operation
Factory Defau
Settings
Reverting to Factory
Settings
The Unity Two-Line is shipped from the factory preprogrammed
in what is known as Default Mode. You have the option of alter-
ing these features for your particular office environment. Once
you have changed these settings, you can revert to the original
factory default settings at any time.
-
Provides for tone dialing.
-
Line hold operation is set for Automatic Hold. When you are
on one line and you press a line key to dial out or answer an
incoming call, you automatically put the first call on hold.
Prime Line Select is programmed to automatically select Line
when you pick up the handset.
-
You have Two Stroke Dialing. To place a call, select a line or
pick up the handset before automatically dialing a number
with a memory key.
Audible feedback for ringer volume adjustment is turned off.
-
Press the I-1 key
-
Press the II key
Press the (-1 key again