Novibo SX GSM SMS Auto-dial Alarm System Installation And User Manual
  1. Manuals
  2. Brands
  3. Novibo Manuals
  4. Security System
  5. SX GSM SMS Auto-dial Alarm System
  6. Installation and user manual

Novibo SX GSM SMS Auto-dial Alarm System Installation And User Manual

Sx business/home gsm alarm system
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

SX Business/Home GSM

Product Features:

1. 16 wireless zones, 3 wired zones alarm system, suitable for small to medium size offices and homes.
2. The system uses GSM communication channel, which can be installed in remote areas with GSM coverage.
3. The system supports 900/1800/1900 MHz GSM SIM cards. CDMA or other SIM cards cannot be used.
4. The system can store and dial/SMS 5 phone numbers (15 digits maximum). If an alarm occurs, the numbers
stored will be dialed/SMS in order starting with the first phone slot. You can set to dial to monitoring center,
police, or the administrator.
5. By using the remote controllers, you can arm, disarm, or set off the alarm.
6. You can control the system by calling the system anytime, wherever you are. For security reasons, a PIN
code must be used for accessing the system.
7. The system supports all kinds of wireless sensors: PIR motion sensors, door/window contact sensors, gas
detectors, smoke detectors, panic buttons, and infrared balusters are available.
8. The system supports wired sensors (NO/NC contacts, different wired sensors are available).
9. The system does not need a land telephone line to operate; it is suitable for cottages, houses, shops, and
garages. The system only needs a GSM network.
10. With back-up batteries inside, the system can detect AC power cut-off and send SMS alert to the numbers
stored.
11. For weak GSM signal area, an external antenna can be used.
12. Two open collector outputs are available to be used according to customer demands.
13. One on-board relay and one open collector speaker output are available for customer application.
14. The system can control home electrical appliances (optional switch box is available).
15. Easy installation and operation.
V3.0_JUL_2012
SX GSM SMS Auto-dial Alarm System

Alarm system

Installation and User Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SX GSM SMS Auto-dial Alarm System and is the answer not in the manual?

Questions and answers

Related Manuals for Novibo SX GSM SMS Auto-dial Alarm System

Summary of Contents for Novibo SX GSM SMS Auto-dial Alarm System

  • Page 1: Alarm System

    SX GSM SMS Auto-dial Alarm System SX Business/Home GSM Alarm system Installation and User Manual Product Features: 1. 16 wireless zones, 3 wired zones alarm system, suitable for small to medium size offices and homes. 2. The system uses GSM communication channel, which can be installed in remote areas with GSM coverage.

  • Page 2: Installation Guide

    SX GSM SMS Auto-dial Alarm System Installation Guide 1. Insert a SIM card to the alarm unit. Remove the slide-lid of the SIM card slot, then slide the card frame to open and insert the SIM card in correct direction (metal contacts face down). Slide back the card frame and close the lid.
  • Page 3 SX GSM SMS Auto-dial Alarm System Internal on-board relay is activated for two minutes when an alarm occurs and it can be controlled through telephone or SMS text commands. It can be used for example, to turn on a lamp to scare away the thief.

  • Page 4: Operating The System

    SX GSM SMS Auto-dial Alarm System Operating the System 1. Using of remote controller: 1. Arming button – press it to arm system. Wired siren will have a short ring. 2. Disarm button – press it to disarm system. Wired siren will have two short rings.
  • Page 5 SX GSM SMS Auto-dial Alarm System 3. How to setup the alarm phone numbers (5 groups) and the content of SMS alerts (5 groups)? 1. User can send a SMS to set the alarm phone number, and the SMS command should be sent as follow:...
  • Page 6 SX GSM SMS Auto-dial Alarm System LED light is in red colour, trigger the sensor you want to match to the system to emit a signal. If the main unit picks up this signal, the wired siren will give short rings and signal LED will flash in red. If no sensor is triggered within 20 seconds, the system starts to search for GSM network and signal LED flashes in orange.

  • Page 7: Technical Parameters

    SX GSM SMS Auto-dial Alarm System Technical Parameters GSM Alarm Module Operating voltage: DC12V Average power: AC/DC exchanger 1A Wireless receiving distance: 80m open space Operating Frequency: 433.92 MHz GSM Frequency: 900 / 1800 / 1900 MHz Outer Alarm Siren Volume: 110 dB Working Condition: Temperature -10 °C to 40 °C...
  • Page 8 SX GSM SMS Auto-dial Alarm System Working Condition: Temperature 0 °C to 45 °C Working Humidity: 10% - 90% rh Remote Control Power Supply: DC12V (inner DC12V battery) Transmission Current: ≤ 15mA Transmission Frequency: 433 MHz ± 0.5 MHz Transmission Distance: 80m open space Troubleshoot Section GSM Problem - The light keeps flashing orange meaning the GSM network has not been established.

Table of Contents