Powering On Using The Main Power Switch - Silvercrest PNA-M4310T User Manual And Service Information

Navigation Device PNA-M4310T

Powering On Using the Main Power Switch

1. Slide the main power switch [page 69, item 10] of
the device into the On position. The status indicator
[page 69, item 4] lights green.
2. Analogue to the first-time setup, the manufacturer
logo will appear for a few moments followed by this
message: "For driving safety, do not adjust the
settings or operate this device while driving."
3. Confirm the setting by tapping this button:
4. The main menu appears (see page 84).
After powering the device on via the main power switch, only
the chosen user interface language and the time format (12
Hours or 24 Hours) have been kept. Any user-defined
settings have been restored to the factory-default values.
The navigation device can obtain the current date and time
from the GPS signals. To do this, start a routing. For this, you
must have selected the correct time zone (see page 85 –
First-Time Setup for Navigation).
English
81