Specifications - Kenton Control Freak STUDIO EDITION User Manual

SPECIFICATIONS

Specifications
User interface Controls:
Displays:
Connections Inputs:
Outputs:
Accessories
Physical data Dimensions:
Weight:
Power Supply 9V dc. @ 250mA
The Control Freak must be powered from a suitable power adaptor.
This should be 9 volts DC regulated or unregulated at 250mA or greater, terminated with a
2.1mm DC jack connected centre to positive.
UK models are supplied with a mains adaptor, but overseas customers must source locally.
Warranty The Control Freak comes with a 12 month back to base warranty (from purchase date).
Customer must arrange and pay for carriage to and from Kenton Electronics.
Support Control Freak profile updates for a wide range of devices are available from our website:
www.kenton.co.uk.
Comments Email your comments and ideas to: feedback@kenton.co.uk
54
Freak
STUDIO EDITION
16 x 60mm sliders
16 x data push buttons
8 x editing push buttons
Data entry wheel
Power switch
LCD 2x16 back-lit
4 LED indicators
Power socket d.c.
2.1mm centre positive
MIDI In, 5 pin DIN type
Ext1, 1/4" stereo jack socket
Ext2, 1/4" stereo jack socket
MIDI Out,Thru 5 pin DIN type
Operating manual
Mains power adaptor (UK Only)
432mm x 163mm x 58mm
3Kg
CONTROL FREAK
Freak
ORIGINAL
8 x 60mm sliders
8 x data push buttons
8 x editing push buttons
Data entry wheel
Power switch
LCD 2x16 back-lit
4 LED indicators
Power socket d.c.
2.1mm centre positive
MIDI In, 5 pin DIN type
Ext1, 1/4" Stereo jack socket
Ext2, 1/4" Stereo jack socket
MIDI Out,Thru 5 pin DIN type
Operating manual
Mains power adaptor (UK Only)
269mm x 163mm x 58mm
2.5Kg