Table of Contents
Advertisement
TROUBLESHOOTING
Unit is not producing mist.
•
Check if unit is powered on.
•
Check if unit is under Intelligent Mode and if ambient humidity has reached set level.
•
Check if water tank is empty.
•
If there is water in the tank, the water level in the base may be too full. Unplug the unit, remove tank
and empty the water in the base.
•
Check if water tank is properly aligned in place.
CARE & MAINTAINENCE
•
Turn off power and unplug unit before cleaning.
•
Never use a detergent or any cleaning chemicals to clean the tank or base. Detergent dissolved in
the water supply can interfere with the mist output.
•
If water tank is extremely dirty, soak with a mild bleach and water solution or citric acid solution and
rinse clean. Never use detergent.
•
Wipe the exterior of the body with a damp cloth.
•
Do not spray water or any liquid onto the control.
•
Never immerse the base in water or let water enter the air outlet or other openings.
•
Clean and rinse the water tank and mist nozzle with lukewarm water frequently to avoid mineral build
up, especially during the heating season.
•
Keep the nebulizer and water sensor free of mineral deposits. Remove water tank and empty the
reservoir. Clean the nebulizer and sensor with a soft brush (old toothbrush). Do not scrape the
nebulizer or water sensor. Do not clean with tools that have metal parts.
•
Leaving water to sit in the tank for more than a couple days may cause bacterial growth. Always
empty the tank if not planning to use for a few days.
TECHNICAL SPECIFICATIONS
Model
Input voltage
Power consumption
Water tank capacity
Unit dimension
SU-3600
AC 120V~60Hz
0.43A / 30W
3.6L
11.5W x 6D x 8.5H inches
2
Advertisement
Table of Contents
Need help?
Do you have a question about the digital ultrasonic humidifier with humidistat and is the answer not in the manual?
Questions and answers