Carburettor Adjustment (Tc); Idle Adjustment (Tc); Idle Adjustment (Te - Txc) - Husqvarna TC 250 2010 Workshop Manual

Carburettor adjustment (TC)

Adjust the carburettor with warm engine and with the throttle control in closed
position. Proceed as follows:
- turn the idle speed adjuster screw (1) located on the left-hand side of the
vehicle, until setting idle RPM quite high (turn clockwise to increase the speed
and counter clockwise to reduce the speed).
- Turn the adjuster screw (2) clockwise to fully closed position, and then turn
it back 1.5 turns.
- Gradually loosen the screw (1) until achieving suitable idle speed setting.

Idle adjustment (TC)

Adjust the carburettor with warm engine and with the throttle control in closed
position. Proceed as follows:
- Turn the idle speed adjuster screw (1) located on the left-hand side of the
vehicle, until setting idle RPM as required (turn clockwise to increase the
speed and counter clockwise to reduce it).

Idle adjustment (TE - TXC)

Adjust the carburettor with warm engine and with the throttle control in closed
position. Proceed as follows:
- Turn the idle speed adjuster screw (3) located on the throttle body on the right-
hand side of the vehicle, until setting idle speed to 1,600 RPM (turn clockwise
to increase the speed and counter clockwise to reduce it).
Part. N. 8000 H1489 (10-2009)
SETTINGS AND ADJUSTMENTS
D.9