NEC Storage M700 Setup Manual page 7

５
Connection – connecting the cables
■ Connect the cables by checking the locations of cables (see figure below) .
Disk array unit
[the four sets of FC 4-port HPE and
the four sets of DPE mounted]
To Outlet
To Disk Enclosure
"NEC Storage M700 Disk Array Unit User's Guide", 3-3 Connection
Note: Connect the power cable to the outlet after the connection of other cables is completed.
Host Port
Disk Port
(HPx) (DP0-DP3)
Management Power
Port Connector
To Application Server
Connect other controllers in the same way.
FC 4-port HPE: HP0-HP3
1G iSCSI 2-port HPE: HP0-HP1
10G iSCSI 2-port HPE: HP0-HP1
To Outlet
To Client Machine