ELS PA10
To remove the mixer follow the diagram below.
(1) Press here
When you are done using the system and are ready to store it make sure you:
• Turn down the Master Volume
• Turn the Mixer off
• Disconnect the AC Power cable from the mixer and the wall outlet
• Disconnect the speaker cables from the both the mixer and the speakers
• Disconnect all other inputs (i.e. microphones, music players, musical instruments) from the mixer
• Store the speaker cables and AC power cable in the speaker compartment and secure the
compartment latch
• Reattach the mixer following the steps below:
(1) Slide the mixer into the
back of the speaker
Check to make sure the connection is secure before picking up the system and transporting.
(2) Gently press forward and
snap the mixer into the latch
American Audio
- www.americanaudio.us - ELS PA10 Instruction Manual Page 10
©
®
(2) Slide button
OPEN
CLOSE
CABLE & MIXER STORAGE
(3) The mixer should be securely
fastened to the speaker and
ready for transport
(3) Lift
Need help?
Do you have a question about the ELS PA10 and is the answer not in the manual?
Questions and answers