Table of Contents
Advertisement
In the case of VCDs/S-VCDs:
•
the current title number/the total number of
titles
•
the played back so far time of the current play-
back title on the VCD/S-VCD in hours, minutes
and seconds (SINGLE ELAPSED)
•
the time to the end of the current playback
title in hours, seconds and minutes (SINGLE
REMAIN)
For audio CDs:
•
the current title number/the total number of
titles
•
the total elapsed time
•
the played back so far time of the current play-
back track on the CD in minutes and seconds
(SINGLE ELAPSED)
•
the time to the end of the current playback
track in minutes and seconds (SINGLE
REMAIN)
•
the total played back time of the CD in minutes
and seconds (TOTAL ELAPSED)
•
the time to the end of the CD in minutes and
seconds (TOTAL REMAIN)
•
To fade out the disc information press the
DISPLAY
"
" button again.
10.4 Programming function
You can programme a playback sequence for the
titles and chapters that are available on the DVD,
VCD, S-VCD disc.
For this, during playback, press the
superimpose the following window:
Programming window
The upper line shows the total number of titles (
available on the disc.
Under this the programme positions 1-10 are listed,
programme position 1 is highlighted.
1.
With the number buttons enter the number of
the title that is to be played back first.
The upper line will now show the chapters available
in this title (CH:).
2.
With the number buttons enter the number of
the chapter that is to be played back. The high-
lighting moves to the programme position 2.
3.
Select with the control buttons
programme positions and enter title and chapter
numbers for the programme position.
•
To display the next 10 programme slots select,
with the control buttons
and press the
up to 20 programme positions.
•
To delete entries in a programme position
select the programme position and press the
CLEAR
button.
•
To cancel the programme function select the
EXIT field and press the
allocated programme positions are deleted.
4.
You can start playback of the programme posi-
tions by selecting the START field and pressing
OK
ENTER
the
/
button.
- 27 -
PROG
button to
, the field
OK
ENTER
/
button. You can allocate
OK
ENTER
/
button. All
TT:
)
further
Advertisement
Table of Contents
