JVC FS-P550 Service Manual page 11

3.1.5 Removing the rear panel
(See Fig.12)
• Prior to performing the following procedures, remove the side
panels L/R.
(1) From the back side of the main body, remove the twelve
screws F attaching the rear panel.
(2) Release the engagement sections e and remove the rear
panel.
3.1.6 Removing the video board
(See Fig.13)
• Prior to performing the following procedures, remove the side
panels L/R and rear panel.
(1) From the forward side of the video board, disconnect the
card wires from connector CN300.
(2) Disconnect the wire to the connector
board.
CN301 on the video
F
e
Fig.12
CN300
CN301
Fig.13
F
e
Rear panel
Video board
(No.MB229)1-11