Replacing And Removing Air Blower And Thermostat - New Buck Corporation 85 Instruction Manual

INSTRUCTIONS FOR REPLACING AND REMOVING
1. - Remove (3) THREE screws holding right side cover panel in place, lay aside.
2. - Remove (2) TWO screws from middle cover door holder with doors.
3. - Remove (1) ONE screw holding right air intake cup to bracket, located under right side
of hearth and between fire box and hearth.
4. - Remove (2) TWO screws on left side of motor screen guard holding motor screen guard to motor
support next to ash pan.
- Remove (1) screw on bottom right side of motor screen guard, lay motor screen guard aside.
5. - Remove motor or thermostat which ever might be faulty.
NOTE: When reinstalling wiring, fallow wiring diagram. (See Page 32)
6. - When motor or thermostat has been replaced, reverse steps 1 thru 4.
MIDDLE COVER DOOR HOLDER WITH DOORS
AIR BLOWER AND THERMOSTAT
MOTOR SCREEN GUARD
Page 33
RIGHT SIDE COVER PANEL
RIGHT AIR INTAKE CUP
Screw Hole