Step 8: View The Video - Instek Digital DVR5000-2U Series Quick Start Manual

d. in the
e. Select the
f. Type the IP Address of the IP cameras. Domain names are supported if available on the
surveillance network.
g. The Port number is dependent on the IP camera. Ch refers to the channel number of
the video server. See the IP camera or video server manual for additional information.
h. The Login option is used to access the camera configuration settings. Refer to the
camera user manual for additional information
i. Click Audio, if supported. Refer to the camera's user manual for additional information.
j. Select the Resolution for the camera from the drop-down list box.
k. Click the
individual camera.
l. To setup 24x7 recording, click the
lect a camera from the camera panel and change the recording mode to
tively, select
setting to all cameras in the group.

STEP 8: VIEW THE VIDEO

a. Click on the "+" icon next to the IP address of the DVR to expand your camera tree.
b. Drag and drop the video source from the camera tree to the blank patterns (1x1, 2x2,
3x3, 4x4, 5x5,3x2, 4x3, 5x3, 6x6, 8x6, 8x8, 1+7,2+7, 2+8, 1+12) to view your video
table, type a descriptive Camera Name.
tab to set up the
and then at the bottom of the screen click
Quick Start Guide DVR5000-2U Series
and (Bitrate) for each
tab and then click
WWW.INSTEKDIGITAL.COM | Page 11
. Se-
. Alterna
to apply the
.