Advertisement
Quick Links
All gas appliances must be installed and/or
commissioned by corgi registered persons.
All Propex Heatsource Appliances are fully CE
marked and are tested by a notified body to the
relevant sections of the Gas Appliance Directive.
PROPEX HEATSOURCE LTD
Unit 5, Second Avenue Business Park,
Millbrook, Southampton,
United Kingdom, SO15 0LP
Tel: 023 8052 8555
Fax: 023 8052 8800
www.propexheatsource.co.uk
E.mail: info@propexheatsource.co.uk
1104 issue C
INSTALLATION
&
OPERATION
INSTRUCTIONS
Malaga 3/3E
Storage Water
Heater
Advertisement
Related Manuals for Propex Malaga 3
Summary of Contents for Propex Malaga 3
- Page 1 All gas appliances must be installed and/or commissioned by corgi registered persons. All Propex Heatsource Appliances are fully CE marked and are tested by a notified body to the INSTALLATION relevant sections of the Gas Appliance Directive. & OPERATION INSTRUCTIONS...
- Page 2 • The Propex Malaga 3 is for use on L.P. Gas only. The Propex Malaga 3E is for use on both L.P. Gas and mains electricity. • On initial operation or when the system has been drained, refill the system with water and flush out by turning on each hot tap until a steady flow of water is obtained.
- Page 3 FAULT FINDING – CHECK LIST The Propex Malaga 3 and 3E water heaters are equipped with a self diagnostic fault finding system. The system operates by flashing the red LED on the Malaga switch panel a certain amount of times to indicate what the fault is. The light will continue to flash while the switch is turned on.
-
Page 4: Technical Data
• Depth – 520mm • Weight empty 9.3kg The Malaga 3 Water Heater is designed to be floor mounted and flues • Inward protrusion from wall 480mm through a vertical section on an external wall. Normally the heater would be •...
Need help?
Do you have a question about the Malaga 3 and is the answer not in the manual?
Questions and answers