Table of Contents
Advertisement
10.4 Programming function
You can programme a playback sequence for the
titles and chapters that are available on the DVD,
VCD, S-VCD disc.
For this, during playback, you press the button
PROG 5* to superimpose the following window:
Programming window
The upper line shows the total number of titles
(TT:)available on the disc.
Under this the programme positions 1-10 are listed,
programme position 1 is highlighted.
1.
Enter with the number buttons 2( the number of
the title, which shall be played back first.
The upper line will now show the chapters available
in this title (CH:).
2.
Enter with the number buttons 2( the number of
the chapter that shall be played back. The high-
lighting moves to the programme position 2.
3.
Select with the navigation buttons
5! further programme positions and enter title
and chapter numbers for these programme
positions.
• To show the next 10 programme positions select
with the navigation buttons
field
and press the button OK d ENTER 5@.
You can allocate up to 20 programme positions.
• To delete entries in a programme position select
the programme position and press the button
RETURN/CLR 4*.
• To cancel the programming function select the
field EXIT and press the button OK d ENTER 5@.
All allocated programme positions are deleted.
4. Start playback of the programme position by
selecting the field START and pressing the button
OK d ENTER 5@.
During the programmed playback the notice
PROGRAM appears in the display.
The programme list will be deleted as soon as you
press the STOP w 4$ button.
11. Display of MP3/
WMA/JPEG/AVI/
MPEG and DivX data
• Insert a storage medium.
The contents of the data medium will be shown
on the display:
Display of MP3 data
f
f 5! the
Display of JPEG data
- 26 -
Advertisement
Table of Contents
