IDEAL HE30 User Manual

Hide thumbs Also See for HE30:

Download this manual See also: Installation and Servicing

users guide

icos

Your Ideal users guide

See reverse for icos installation & servicing instructions

HE30, HE36

When replacing any part on this appliance, use only spare parts that you can be

assured conform to the safety and performance specification that we require. Do not

use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.

Need help?

Do you have a question about the HE30 and is the answer not in the manual?

Page 1 When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.
Page 2: Minimum Clearances
Benchmark Commissioning Checklist. You can check your installer by calling CORGI direct on 01256 372300. Caradon Ideal Limited is a member of the Benchmark initiative and fully supports the aims of the programme. Benchmark has been introduced to improve the standards of installation and commissioning of central heating systems in the UK and to encourage the regular servicing of all central heating systems to ensure safety and efficiency.
Page 3: Frost Protection
Control of water temperature Boiler Overheat Thermostat The boiler controls the central heating radiator temperature to a This thermostat will shut down the boiler in the event of maximum of 82 C, adjustable via the CH thermostat knob (C). overheating. Should this occur a fault code 'L' 'A' will be displayed.
Page 4 ‘ H:A H:A ’ (flashing). Caradon Ideal Limited pursues a policy of continuing improvement in the design and Ideal Consumer Helpline performance of its products. The right is therefore reserved to vary specification without notice. Tel: 01482 498660 Ideal Boilers, P.O.

He36