If The Directory Is Mapped To A Shared Network Folder; If The Directory Is Not Mapped To A Shared Network Folder; Overview Of The Wlan Adapters - Philips ACC8160 User Manual

Note
• You will not be able to administer any WLAN adapter
until an IP address is assigned to the device ( Installation,
p. 9.) and FTP settings of the WLAN adapters are
configured ( FTP settings, p. 14).
• Remember that you can only administer WLAN adapters
sharing the same FTP settings at a time!

If the directory is mapped to a shared network folder

1
Check the LOCAL NETWORK DRIVE radio button.
2
Enter the absolute path to the shared upload directory or
click the BROWSE button and select the folder.
3
Enter an administration password for direct connections with
WLAN adapters in the PASSWORD field and confirm it in
the RE-ENTER field.
4
Click OK at the bottom of the configuration dialog.
If the directory is not mapped to a shared network
folder
1
Check the FTP SERVER radio button.
2
Enter the IP address or domain name of the FTP server in
the SERVER field.
3
Enter the FTP port number in the PORT field. Unless your
FTP server is configured to use a nonstandard port number,
this should be 21.
4
Enter the user name and the password of the account
needed to log on to the FTP server into the USER NAME
and PASSWORD fields.
5
Click the OK button at the bottom of the configuration
dialog.

Overview of the WLAN adapters

Upon start-up, the Administration Tool automatically retrieves
configuration data from any WLAN adapter, that placed an
identification file within the shared upload directory on the FTP
server, and displays the data record in the application' s main pane.
Double-clicking on a WLAN adapter in the list opens its configu-
ration interface in the system' s default browser.
A WLAN adapter is regarded on line if both the connection to
the device was established and its configuration data could be re-
trieved successfully. The on line status is represented by a green
or a red dot in the ONLINE STATUS column.
Every WLAN adapter will display the following information:
• Its MAC address
• Its IP address
• The date and time when it was last used (or when a Pocket
Memo dictation recorder was last connected).
Additionally, the following settings are displayed for all online
WLAN adapters:
• The firmware version of the WLAN adapter
• The MAC address of the WLAN adapter
• A flag that indicates whether the WLAN adapter is configured
via a DHCP server
• IP address settings of the WLAN adapter
• FTP/FTPS server settings
• LAN and wireless LAN settings
• A flag that indicates whether the file upload settings of the
WLAN adapter are taken from the Pocket Memo dictation
recorder or from the WLAN adapter itself
• A flag indicates if all files (or only EOL dictation files) will be
uploaded to the FTP/FTPS. For this setting to take effect, the
WLAN adapter must be in charge of the file upload settings!
• A flag that indicates whether the dictation files will be deleted
from the Pocket Memo dictation recorder after they are up-
loaded to the FTP/FTPS server by the WLAN adapter. For this
setting to take effect, the WLAN adapter must be in charge of
the file upload settings!
23
EN