Interpreting The Device Leds - PaloAlto Networks PA-200 Hardware Reference Manual

Interpreting the Device LEDs

•
Removal of equipment top cover is to be performed only by trained service person(s).
Interpreting the Device LEDs
Figure 4 shows the LEDs on the front panel of the PA-200 firewall.
Figure 4. Front Panel LEDs
Table 3 describes the LED functions and states.
Table 3. LED Functions and States
Interface
POWER
STATUS
FAN
HA
ALARM
TEMP
12 • Maintaining the Hardware
State Description
Green The device is powered.
Off Power is off.
Green The device is operating normally.
Yellow The device is booting up.
Green The fan is operating normally.
Note: The fan is under the control of the firewall processor and may not
run all the time. This is normal.
Red The fan has failed.
Green This device is the current active device.
Yellow This device is the current passive device.
Off High availability is not enabled on this device.
Red There is a hardware failure, which may include power supply
detected but not working, fan failure, HA failover, or temperature
above high temperature threshold.
Off The device is operating normally.
Green The temperature is normal.
Yellow The temperature is outside the normal tolerance.
Palo Alto Networks