Using Intel Active Management Technology (select
models only)
Intel® Active Management Technology (iAMT) allows discovery, repair, and protection of networked
computing assets. With iAMT, computers can be managed whether they are on or off. The iAMT
solution is available on computers with Intel Centrino® with vPro mobile technology.
Features of iAMT include:
●
Hardware inventory information
●
Event notification
●
Power management
●
Remote diagnosis and repair
●
Hardware-based isolation and recovery—limit or cut off computer network access if virus-like
activity is detected
Enabling the iAMT solution
To configure iAMT settings:
NOTE:
The
Setup.
1.
Turn on or restart the computer.
2.
Before Windows starts up, press ctrl-p.
NOTE:
access the MEBx setup utility.
3.
Enter the ME password. The factory setting for the password is admin.
The MEBx setup utility opens. Use the arrow keys to navigate.
4.
Choose to configure Intel ME, configure iAMT, or change the Intel ME password.
5.
When you have made your selections, select Exit to close the MEBx setup utility.
Using the MEBx setup utility menus
NOTE:
For more information on iAMT, go to the Intel Web site at http://www.intel.com, and then
search for iAMT.
Intel ME Configuration
Select
Intel ME State Control
Intel ME Firmware Local Update
LAN Controller
152 Chapter 16 Management and printing
Downloaded from LpManual.com Manuals
ctrl-p
prompt is visible only if the AMT Setup Prompt option is enabled in Computer
If you do not press
ctrl-p
at the appropriate time, you must repeat steps 1 and 2 to
To do this
Disable/enable the management engine.
Disable/enable local management of firmware updates.
Disable/enable the integrated network controller.