Restore Default Password - ALIBI ALI-IPU Series Software User Manual

SECTION 2: NETWORK CONNECTION
b. Modify the network settings to values compatible with the subnet where it is installed.
c. Enter the admin password for the device in the password field. By default, the admin user password for Alibi cameras
is 1111.
d. Click the Save button. The new IP address, port, etc. settings will appear in the list with the device you modified.
6. Close the Alibi Discover Tool by clicking the Close icon (
2.1.1 Restore Default Password
The Alibi Discover Tool includes a feature in the lower right corner of the screen labeled Restore Default Password. This feature
is a Support-only tool that allows them to reset the password if it was changed and lost. At this time, it is only used for Alibi dome-
style cameras, and Alibi NVRs and DVRs. If you lost the password for any of these devices, contact your Support organization for
assistance.
If you are using an Alibi bullet-style camera, you can reset the camera to its default configuration (including the password) by
pressing the RESET button on the back of the camera.
6
) in the upper-right corner of the screen.
T