Table of Contents
Advertisement
Issue 21 - February 2000
One-Touch operation
or
To erase stored feature
Pause
Using the REDIAL Key, a Pause can be inserted in the dialling sequence. The Pause time can be
pre-programmed. For example, a pause can be inserted between, PBX line access number 9 and
telephone number. This is also available for Speed Dialling and One-Touch Key operation. One
Pause (key operation) is counted as one digit.
Numbers stored in One-Touch and Line Keys can have Pauses inserted into them.
To insert a Pause
Flash
By pressing the FLASH Key, you can terminate an External or Internal Call. Having terminated the
Call, you are automatiCally connected to an External line. If you wish to make a Call immediately
after another Call, without replacing the Handset press the FLASH Key and dial.
Signal Conversion
Converts the normal signalling method of Pulse to Tone dialling.
Even if the telephone line is Pulse dialling, you can make Calls using Tone dialling by pressing the
! Key before dialling the number. Replacing the handset on the cradle will automatiCally return
the telephone to its original pulse signalling.
© Panasonic UK Ltd.
1. Press the ON/OFF Key or lift Handset
•
You will hear internal Dial Tone.
2. Press the desired One-Touch Key.
1. Press the ON/OFF Key
•
You will hear internal Dial Tone.
•
The ON/OFF indicator will light up
2. Press MEMORY Key.
3. Select the One-Touch Key you wish to erase.
4. Press HOLD Key.
5. Press the ON/OFF Key
•
The ON/OFF indicator will go out
6. Press REDIAL Key at place where Pause is desired.
- 28 -
A-Series (UK)
E & OE
Advertisement
Table of Contents
