Dreambox DM820 HD User Manual page 76

6. If you want to program another Button or you made a mistake during programming, just repeat this
process starting from step 3.
If no code is entered within 6 seconds or the TV-Mode-Button is pressed, the remote control will
exit the programming mode automatically.
Dreambox-Mode and TV-Mode
Dreambox-Modus
Press the DREAM-Mode-Button in order to activate the Dreambox-Mode in your rcu. Use the two
DIP-Switches in the battery compartment on the back, if you are going to use more than one dreambox in
a single room.
TV-Mode
By pressing the TV-Mode-Button the remote control unit switches to the tv-mode and the last stored
rcu-code is used. Now you can use the dreambox rcu instead of the tv-device rcu in order to control your
tv-device.
Duration of lighting of the Dreambox-Symbol
You can adjust (in seconds) the duration of how long the dreambox-symbol at the bottom is lit-up after you
once pressed a button on the rcu.
1. Press the OK-Button and the DREAM-Mode-Button for ˜ 3 seconds. The DREAM-Mode-
Button flashes 3 times.
2. Press one of the keys 0-9 on the Numeric-Keypad. 0 means "off", 1-9 means the time in seconds.
Factory reset
To reset the remote control to the factory defaults, follow these steps:
1. Press the TV-Mode-Button and the OK-Button until the TV-Mode-Button lights up.
2. Press 999 on the Numeric-Keypad.
71